Overview
The TrakMotive OE replacement rear CV axle, part number TRMPOL-7040, fits the left or right rear position of Polaris Ranger and Ranger XP models from 2013 through 2017, including Ranger 570, 900 and Diesel models.
TrakMotive designs the axle for rough ground and says its joints are packed with high temperature, high performance moly grease. The company rates the solid chrome steel center shafts up to 20% stronger than OEM and says each axle comes fully assembled.
Key features
- Solid chrome steel center shafts, up to 20% stronger than OEM
- Precision machined and heat treated
- High quality neoprene rubber dust boots
- Joints packed with high temperature, high performance moly grease
- Fully assembled, with all necessary hardware included
Rear axle care
A rear CV axle carries the load of the rear wheel and is exposed to the same mud, dust and water as the front. Because the axle moves with the rear suspension, the joints see constant angle changes, and the boot is the main barrier protecting them.
Rear hubs should be clean and free of rust before a new axle is fitted, because damaged splines cause vibration and shorten the life of the new part. Once installed, check for loose hardware after the first few rides and look for leaks from the boot.
Rear axles are often replaced in pairs on machines that see heavy use, since the opposite side has the same wear history. Inspect both sides at the same time during service to avoid a repeat trip.
- Clean the hub and splines
- Check for loose hardware after early rides
- Look for grease leaks at the boot
- Inspect both sides during service
Specifications
| Brand | TrakMotive |
|---|---|
| Part number | TRMPOL-7040 |
| Position | Rear, left or right |
| Center shaft | Solid chrome steel |
| Strength | Up to 20% stronger than OEM (manufacturer rating) |
| Dust boots | High quality neoprene rubber |
| Warranty | One year limited |
Vehicle fitment
The fitment covers these Polaris models:
- Ranger 570: 2015–2016
- Ranger 570 Crew: 2015
- Ranger 570 XP: 2016
- Ranger 570-6 Crew: 2016–2017
- Ranger 900 Crew: 2014–2015
- Ranger 900 XP: 2013–2017
- Ranger 900-5 Crew: 2016
- Ranger 900-6 Crew: 2015–2016
- Ranger Crew Diesel: 2013–2014 and 2016–2017
- Ranger Diesel: 2013–2017
- Ranger Crew XP 900 and Ranger Crew XP 1000: 2017
- Ranger XP 1000: 2017
- RZR S 570: 2017
Model years outside those listed, such as 2012 or 2018, are not covered. The Ranger 570, 900 and Diesel families are listed separately above, so match your machine to one of those entries rather than to the family name alone. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The axle is fully assembled and needs no modifications to install. It is supplied as one piece, so no separate joint assembly is needed. A rear CV axle delivers power from the differential to the rear wheel while the wheel moves up and down with the suspension. The side must match the position being replaced, since rear left and rear right units are sold separately.
What’s included
All necessary hardware is included with the fully assembled axle.









