Overview
The TrakMotive OE replacement front CV axle, part number TRMPOL-7064, fits the left or right front position of 2016–2017 Polaris RZR XP Turbo and RZR XP 4 Turbo models.
The axle has a solid chrome steel center shaft that is up to 20% stronger than OEM. Each shaft is precision machined and heat treated, and the dust boots are high quality neoprene rubber. The axle comes fully assembled. A CV axle carries engine power from the differential to the wheel while letting the wheel steer and move with the suspension. The joints handle both changing angles and steady rotation, and the neoprene boots keep the joint grease sealed in and mud out.
Key features
- Solid chrome steel center shaft
- Up to 20% stronger than OEM
- Precision machined and heat treated
- High quality neoprene rubber dust boots
- Fully assembled, with all necessary hardware included
Turbo setup considerations
Turbocharged side-by-side machines are often driven with more throttle, which adds load to the axles. Keeping the joints greased and the boots sealed matters more on a machine that is driven hard. Heavy throttle use and frequent low-speed loading both stress the joints, so inspect the axle after aggressive runs.
When a front axle is replaced, it is a good time to look at the matching parts that take the same loads, such as wheel bearings, hub seals and the joint on the opposite side. Tire size and wheel changes also change the angles the joints must handle, so check for binding after any upgrade. Keep the Turbo designation in mind when comparing parts, since fit depends on it.
- Check the opposite side joint for wear
- Inspect hub seals and bearings
- Recheck joint angles after any tire or wheel change
Specifications
| Brand | TrakMotive |
|---|---|
| Part number | TRMPOL-7064 |
| Position | Front, left or right |
| Center shaft | Solid chrome steel |
| Strength | Up to 20% stronger than OEM (manufacturer rating) |
| Dust boots | High quality neoprene rubber |
| Warranty | One year limited |
Vehicle fitment
The fitment covers 2016 and 2017 Polaris RZR XP Turbo and RZR XP 4 Turbo models. Confirm the Turbo designation on your machine, because the fitment is limited to Turbo models.
Non-Turbo RZR XP 1000 models are not covered by this axle, and neither are model years 2015 and earlier. Both the RZR XP Turbo and RZR XP 4 Turbo are listed here for 2016 and 2017. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The axle comes fully assembled and needs no modifications to install, so it is fitted in the front position with the included hardware. Since it replaces the original front axle, it sits in the same position and is secured with the hardware that comes with it. Confirm the Turbo designation on your machine before fitting it.
What’s included
The axle comes fully assembled with all necessary hardware. A one year limited warranty covers it.









