Overview
The TrakMotive OE replacement CV axle, part number TRMPOL-7063, is a fully assembled front axle for the driver or passenger side of some 2016–2017 Polaris RZR XP 1000 and RZR XP 4 1000 models.
TrakMotive builds its replacement constant velocity (CV) axles with a solid chrome steel center shaft, which the company says is up to 20% stronger than OEM. The joints are packed with high temperature, high performance moly grease, and TrakMotive says they run through varying angles and constant rotation without friction or play.
Key features
- Solid chrome steel center shaft, up to 20% stronger than OEM
- Precision machined and heat treated
- High quality neoprene rubber dust boots
- Joints packed with high temperature, high performance moly grease
- Fully assembled, with all necessary hardware included
- One year limited warranty
Before you install
A CV axle carries drive power from the transmission out to the wheel hub while letting the wheel steer and the suspension travel. On a side-by-side the joints work under heavy loads and changing angles all day, so the hub splines and output shaft should be inspected for wear before fitting. A worn spline can chew up a new shaft quickly.
Clicking on tight turns is a common sign of a worn outer joint. Torn boots let grit and water in and wash out the grease, so look over the boots at routine service and keep the clamps snug. After the first few trail runs with any new axle, recheck the fasteners.
- Look for splits or cracks in the boots
- Listen for clicking on tight turns
- Check hub splines for wear
- Recheck fasteners after the first few rides
Specifications
| Brand | TrakMotive |
|---|---|
| Part number | TRMPOL-7063 |
| Position | Front, driver or passenger side |
| Center shaft | Solid chrome steel |
| Strength | Up to 20% stronger than OEM (manufacturer rating) |
| Dust boots | High quality neoprene rubber |
| Joint lubricant | High temperature, high performance moly grease |
| Warranty | One year limited |
Vehicle fitment
The fitment covers 2016–2017 Polaris RZR XP 1000 and RZR XP 4 1000 models, but not every model in those years is included. Match the year and model on your machine to that coverage rather than assuming full coverage.
Turbo models, the 2014–2015 RZR XP 1000 and any year outside 2016–2017 are not covered. Check the year, model and side on your machine against this list before installing, and confirm your vehicle’s year, model and trim before ordering.
Installation notes
The axle arrives fully assembled and needs no modifications to install. As an OE replacement, it goes into the same front position as the original axle, using the hardware supplied with it. It is a complete unit, so no separate joint assembly is needed. Left and right units are sold as separate positions, so confirm which side the machine needs before starting.
What’s included
The axle is fully assembled and includes all necessary hardware. A one year limited warranty covers the axle.









