Overview
The Coyote Enterprises Staun Tyre Deflators are brass automatic tire deflators sold as a set of 4, with a setting range of 6 to 30 PSI. Each one screws onto a tire valve and lets air out until the tire reaches a preset pressure, so you can air down for off-highway driving without checking each wheel with a gauge.
Each deflator is a spring-loaded check valve. The spring pressure sets the shut-off point: more spring pressure gives a higher destination pressure, and less spring pressure gives a lower one. The Adjustment Cap changes that spring pressure and is held in place by the Lock Collar. DESTINATION PRESSURE is the pressure you choose to air down to. These deflators are universal fit for any tire valve, so they are not built for one vehicle.
Key features
- Screws onto any tire valve and deflates automatically to a preset pressure
- Spring-loaded check valve; the Adjustment Cap changes the destination pressure
- Setting range of 6 to 30 PSI
- Lock Collar holds the Adjustment Cap in place once set
- Brass color
- Set of 4 deflators with a leather carrying case
Trail pressure and tire care
Airing down lowers the pressure in each tire so it can grip rocks, roots and sand better. Automatic deflators handle the letting-out step, but they do not put air back in. After a trail run, reinflate with a portable compressor and a gauge, filling each tire to the pressure suited to road use.
Tire bead seating deserves attention after a deep air-down. Low pressure can let the bead move on the rim, so check that each tire is seated and holding air before driving fast. Keep a tire repair kit and the deflator caps in one place so they are not lost on the trail.
- Carry a portable compressor with a gauge
- Check bead seating after reinflating
- Keep valve caps clean and tight
- Inspect tire sidewalls for cuts after rough terrain
Specifications
| Brand | Coyote Enterprises |
|---|---|
| Product | Staun Tyre Deflators, set of 4 |
| UPC | 856967001006 |
| Setting range | 6 to 30 PSI |
| Color | Brass |
| Quantity | 4 deflators |
| Fitment | Universal fit (any tire valve) |
Vehicle fitment
Fitment is not vehicle-specific. The deflators thread onto any tire valve, so the valve type on your wheels matters more than the vehicle model. Match the valve type on your wheels before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use the Adjustment Cap to choose the destination pressure, and keep the Lock Collar in place so the cap stays where it was set. Do not grip the body with pliers or vice grips, since pinching can distort the main body, cause a malfunction, and void the warranty.
What’s included
Four Staun Tyre Deflators, a leather carrying case, and setting and use instructions.
















