Overview
The Baer Brakes 2000001 is a pair of aluminum wheel spacers for four-lug wheels with 4×100, 4×108 or 4×114.3 mm bolt patterns. A wheel spacer, sometimes called a hub spacer, sits between the wheel and hub to push the wheel outward, which can add brake clearance and widen the track. These spacers are machined from 6061-T6 billet aluminum with a clear anodized silver finish.
Key features
- Sold as a pair of spacers
- 6061-T6 billet aluminum construction
- Clear anodized silver finish
- Listed bolt patterns: 4×100, 4×108 and 4×114.3 mm
- Stated benefits: wider track, more brake clearance and improved appearance
- Made in the USA, per the manufacturer
Choosing and fitting spacers
Wheel spacers change where the wheel sits relative to the hub, so they alter the load on the wheel bearings, the steering components and the suspension geometry. Spacer thickness also moves the tire outward, which can rub on fenders, brake calipers or suspension parts at full steering lock or under compression. Measure clearance with the spacers fitted before driving.
Stud length is the first thing to check when choosing a spacer. Studs that are short for the spacer thickness can strip threads or let the wheel loosen. Hub fit matters too: confirm the center bore suits the hub so the wheel is centered rather than held only by the lug nuts. Longer studs and correctly seated lug nuts are usually replaced together with the spacer.
- Re-torque lug nuts after the first few drives
- Inspect the spacer faces and threads for cracks or galling
- Keep spacer and hub faces clean before mounting
- Recheck fit after changing tire size or wheel offset
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000001 |
| UPC | 844165004622 |
| Quantity sold | Pair (2 spacers) |
| Bolt patterns | 4×100, 4×108, 4×114.3 mm |
| Lug holes | 4 |
| Center bore | 2.560 inch |
| Stud hole diameter | 0.562 inch |
| Spacer outside diameter | 6.000 inch |
| Material | 6061-T6 billet aluminum |
| Finish | Clear anodized |
| Color | Silver |
| Grade | Premium |
| Country of origin | US |
| Mounting hardware included | No |
Vehicle fitment
Match the spacer by bolt pattern (4×100, 4×108 or 4×114.3 mm), the 2.560 inch center bore and the 0.562 inch stud holes. A wheel that does not share those figures should not be used with this spacer.
Installation notes
Most cars cannot take more than 1/4 inch (.250) of spacer on stock studs, and that limit does not always hold. Confirm that the studs have enough thread engagement for your setup, and use longer studs where needed.
Mounting hardware is not included, so the studs and nuts must come from your own supply. Do not drive with spacers that sit loosely or sit on short studs.
What’s included
Two aluminum wheel spacers, sold as a pair.
Not included: Mounting hardware, including studs and nuts.












