Overview
The Baer Brakes 2000002 is a pair of premium 6061-T6 aluminum 4-lug wheel spacers, 0.375 inch (3/8 inch) thick, for wheels on 4×100, 4×108 or 4×114.3 bolt patterns. Spacing the wheel out on the hub widens the track and creates more room between the wheel and the brake caliper. The package holds two spacers. It is a universal-fit part, so the bolt pattern, hub and stud length must suit your vehicle.
The spacers are precision-machined in-house from 6061-T6 billet aluminum and finished in clear anodized silver. The center bore measures 2.560 inches, each lug hole is 0.562 inch, and the outside diameter is 6.000 inches. They are made in the USA, with US as the country of origin.
Key features
- Four lug holes for 4×100, 4×108 and 4×114.3 bolt patterns
- Premium 6061-T6 billet aluminum body
- 0.375 inch (3/8 inch) thickness for added wheel spacing
- Built to widen track width
- Built to increase brake clearance
- Built to improve appearance
- Clear anodized silver finish
- Sold as a pair with two spacers included
- Made in the USA
Choosing the right setup
A 3/8 inch spacer is a middle option for drivers who need some extra track width or brake room without taking on the full offset of a thicker spacer. Thinner spacers generally keep wheel bearing loads and steering geometry closer to stock, which matters on vehicles that see daily road use as well as trail work.
Before choosing a thickness, check tire rubbing at full lock and at full suspension compression. Wheel studs and lug nuts often need attention when spacers are added, so inspect threads for damage and replace worn studs at the same time. Keep the spacer and hub faces clean so the wheel seats flat against the spacer.
- Measure tire clearance at full steering lock
- Replace stretched or corroded wheel studs
- Confirm the hub bore matches the center bore
- Re-torque lug nuts after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000002 |
| UPC | 844165004639 |
| Material | 6061-T6 billet aluminum |
| Grade type | Premium |
| Finish | Clear anodized |
| Color | Silver |
| Thickness | 0.375 inch |
| Bolt patterns | 4×100, 4×108, 4×114.3 |
| Lug holes | 4 |
| Lug hole diameter | 0.562 inch |
| Center bore (inside diameter) | 2.560 inch |
| Spacer outside diameter | 6.000 inch |
| Quantity sold | Pair, 2 spacers |
| Mounting hardware included | No |
| Country of origin | US |
| Emission code | 6 |
Vehicle fitment
Select the bolt pattern that matches your wheels (4×100, 4×108 or 4×114.3), then confirm the hub and stud requirements for your vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Before fitting these 3/8 inch spacers, check how many threads of each stud will engage the nut. Many vehicles can handle no more than 1/4 inch (.250) of spacer with stock studs, and that limit is not guaranteed, so confirm stud length first. Use studs and nuts of the proper length for the added thickness, since this pair does not come with mounting hardware.
What’s included
One pair of Baer Brakes 6061-T6 aluminum wheel spacers, 2 spacers in total, 0.375 inch thick.
Not included: mounting hardware.












