Overview
The Smittybilt 2820 is an A.W.S. Aluminum Winch Shackle, a shackle that Smittybilt says gives a safer and stronger winch point than standard winch hooks. It is precision machined from lightweight billet aircraft grade 6061 T-6 aluminum.
The shackle is rated to a maximum load of 17,000 lbs and fits synthetic ropes and wire cables up to 1/2 in. in diameter. It works with roller and aluminum fairleads and with 3/4 in. and 7/8 in. D-rings.
Installation and removal are simple, and the black anodized finish is designed to be durable and rugged. It is a universal recovery accessory rather than a vehicle-specific part.
Key features
- Maximum load rating of 17,000 lbs
- Precision-machined 6061 T-6 aluminum billet
- Black anodized finish
- Fits rope and wire cable up to 1/2 in. diameter
- Works with roller and aluminum fairleads
- Works with 3/4 in. and 7/8 in. D-rings
Inspecting recovery shackles
A shackle is only as reliable as its pin, bow and threads, so inspection is worth doing before each trip. Check for bends, cracks, deep gouges and any sign that the bow has spread. Aluminum can show fatigue differently from steel, so look closely at the bow where it bends under load.
Keep the pin fully seated and use the correct pin type for the connection. Clean grit out of the threads and keep the finish intact, because anodizing protects against corrosion but can scratch. Replace a shackle after it has been overloaded or dropped hard, even if no damage is visible.
- Check the bow for bends or cracks
- Seat the pin fully before loading
- Retire any shackle that has been overloaded
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 2820 |
| UPC | 631410119145 |
| Product type | Aluminum winch shackle (A.W.S.) |
| Maximum load | 17,000 lbs |
| Material | 6061 T-6 aluminum billet |
| Finish | Black anodized |
| Rope or cable | Synthetic rope and wire cable up to 1/2 in. diameter |
| Compatible D-rings | 3/4 in. and 7/8 in. |
Vehicle fitment
This shackle is recovery gear and is not vehicle-specific. It is a universal fit, so the match depends on the winch line and D-ring size you are using.
Installation notes
Check that the rope or cable is no more than 1/2 in. in diameter and that your D-ring is 3/4 in. or 7/8 in. before attaching the shackle. Keep the load within the 17,000 lbs rating.
What’s included
One aluminum winch shackle is included per unit. D-rings, rope and cable aren’t included.






































