Overview
The Factor 55 FlatLink 00050-04 is a folding shackle thimble and D-ring for recovery winches, designed to replace the conventional winch hook. It is universal fit, so fairlead style and rope or cable diameter decide whether it suits a winch.
Hooks can cut and fray recovery straps, and during the slack in a typical winching recovery the strap ends may slip out. Screw pin shackles prevent this because the screw pin holds strap loops in place. The FlatLink attaches the cable eye without splicing, so the rope itself does not need to be spliced.
Key features
- Folding shackle mount, described by Factor 55 as the first of its type for recovery winches
- Shackle thimble and D-ring take the place of the usual winch hook
- Under 1.75 inches thick, so it works with roller fairlead license plate mounting brackets
- Attaches to steel cable or synthetic rope up to 3/8 inch diameter with no splicing
- Cable eye held by a 5/8 inch diameter grade 5 steel double shear pin plus internal snap ring
- EPDM rubber guards protect alloy fairleads, secured with 4 barbed tips
- Stows against roller or Hawse type fairleads; designed for common 3/4 inch shackles
- USA-made from 6000 series billet aluminum, anodized and powder coated in 5 different colors
Caring for synthetic rope
Synthetic rope gives a lighter, more flexible line, but it is sensitive to sharp edges and heat from friction. Running it over a rough fairlead or under a loose thimble can cause abrasion that is hard to see from the outside, so the rope should be checked along the stretch that runs through the guides.
Keep the rope clean and dry, and store it out of direct sunlight when not in use. Dirt trapped in the fibers grinds against the thimble and guards, so rinsing after muddy trips helps both the rope and the hardware last longer.
- Look for fuzzing or glazing on the rope
- Keep the rope out of direct sun when stored
- Rinse dirt from the rope after muddy trips
Specifications
| Brand | Factor 55 |
|---|---|
| Part number | 00050-04 |
| UPC | 70000693224 |
| Material | 6000 series billet aluminum |
| Finish | Anodized and powder coated, 5 colors |
| Thickness | Less than 1.75 inches |
| Rope or cable size | Steel cable or synthetic rope, up to 3/8 inch diameter |
| Retention | 5/8 inch diameter grade 5 steel double shear pin with internal snap ring |
| Guards | EPDM rubber with 4 barbed tips |
| Shackle size | Common 3/4 inch shackles |
| Origin | Made in the USA |
Vehicle fitment
It is universal fit, so no vehicle year, make or model applies. Suitability comes from your winch hardware: roller fairlead license plate mounting brackets, roller or hawse type fairleads, and rope or cable up to 3/8 inch.
Fairlead style, mounting bracket and rope diameter are the checks to make here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It goes on in minutes and needs no splice in the rope or cable. Before a pull, check that the double shear pin and snap ring are secure, since they carry the load at the cable eye.
What’s included
The FlatLink is described with its EPDM rubber guards, the 5/8 inch steel double shear pin and the internal snap ring.
Not included: 3/4 inch shackles, winch cable or synthetic rope, and the roller or Hawse type fairlead.


















