Overview
The Factor 55 ProLink Loaded, part number 00015-04, is a black shackle mount for winch cables and synthetic ropes with a 16,000 pound max load rating. It replaces a conventional winch hook with a screw pin shackle connection.
This version has a titanium pin and a silver guard. Factor 55 says screw pin shackles are up to 5X stronger than conventional winch hooks, and that recovery straps cannot slip out of a shackle the way they can from a hook.
The body is billet construction, precision machined from 6061-T6 Kaiser Aluminum round bar. It is anodized and zinc plated and made in the USA. The mount fits steel cables and synthetic ropes up to 3/8 inch in diameter. Fairleads, the guides on a winch-equipped bumper, come in hawse and roller types, and this mount works with both.
Key features
- Black finish with a titanium pin and silver guard
- Fits steel cables and synthetic ropes up to 3/8 inch in diameter
- Billet construction, precision machined from 6061-T6 Kaiser Aluminum round bar
- Anodized and zinc plated
- Installed and removed in minutes with simple snap ring removal
- Cinches neatly against Hawse or Roller fairleads
Care for anodized finishes
Anodized aluminum has a hard oxide surface that resists everyday wear, but deep scratches can break through and expose the metal beneath. Zinc plating is a protective coating typically used on steel, while anodizing builds up the oxide layer on aluminum. On a winch mount, the finish is mostly exposed to grit, mud and rope abrasion. Wipe the body after muddy recoveries and rinse out sand that collects in the pin area, since trapped grit can wear the surface faster than the finish itself.
Check the snap ring and removable pin at each service, since they hold the eye and carry the load. A worn or bent snap ring should be replaced before it is used again. Keep spare hardware on hand if you run the mount often, and store the pin where it will not be lost in the mud. Regular checks make it easier to spot small problems before they become a failed recovery.
Specifications
| Brand | Factor 55 |
|---|---|
| Part number | 00015-04 |
| UPC | 700006383991 |
| Color | Black |
| Pin | Titanium |
| Guard | Silver |
| Cable or rope capacity | Up to 3/8 inch diameter |
| Max load rating | 16,000 pounds |
| Material | 6061-T6 Kaiser Aluminum round bar, billet |
| Finish | Anodized and zinc plated |
| Shackle size | Standard 3/4 inch screw pin |
| Removable pin | 5/8 inch double shear |
| Mounting tab thickness | 1.2 inch |
| Made in | USA |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit mount. Because it connects to cable and rope eyes, no vehicle year, make or model applies. Match the 3/8 inch cable or rope limit and the 3/4 inch shackle to your setup.
Installation notes
Insert the cable or rope eye into the body and secure it with the 5/8 inch pin. Attach the 3/4 inch screw pin shackle at the front mounting hole. Factor 55 describes snap ring removal as simple, which is how the pin comes out when the eye is changed. Check that the pin is fully seated and the snap ring is in place before loading.
What’s included
One ProLink Loaded shackle mount in black, part number 00015-04, with a titanium pin and silver guard.
Not included: The 3/4 inch screw pin shackle.






























