Overview
The Factor 55 ProLink Loaded, part number 00015-01, is a shackle mount that lets a standard 3/4 inch screw pin shackle attach to an existing winch cable or synthetic rope eye. It is meant to take the place of a conventional winch hook.
The mount is engineered and machined in the USA from lightweight billet 6061 aluminum. Billet means the body is machined from solid bar stock, and 6061 is a widely used aluminum alloy for machined parts. The eye is captured inside the body by a removable, oversized 5/8 inch double shear pin.
Winch hooks are open at the end, while a screw pin shackle is closed by its pin. Using a shackle at the line end keeps the connection closed, which is the reason for swapping the hook out. A fairlead is the guide on a winch-equipped bumper that the line passes through, and the two common types are hawse and roller designs. This mount is compatible with both.
Key features
- Takes a standard 3/4 inch screw pin shackle
- Removable oversized 5/8 inch double shear pin
- Precision shackle mounting hole at the front
- Massive 1.2 inch thick mounting tab
- Compatible with Hawse and Roller fairleads
- Engineered and machined in the USA
Hooks versus shackles
A winch hook is open at the tip, so a strap or line can work free under slack. A screw pin shackle closes around the attachment point and is held by its pin, which keeps the connection closed through the whole pull. Swapping the hook for a shackle mount is a common upgrade for owners who recover often. Keep in mind that the shackle is a separate part, and its rating, pin condition and seating matter as much as the mount itself.
Fairlead choice also affects how the line runs. Hawse and roller fairleads guide the line differently, and a mount that sits cleanly against one may rub against the other if the bumper is misaligned. Before a recovery, run the line through the fairlead by hand to check for binding. Inspect the aluminum body for gouges and the pin for wear, and replace any part that does not seat fully or shows damage.
Specifications
| Brand | Factor 55 |
|---|---|
| Part number | 00015-01 |
| UPC | 700006383977 |
| Material | Lightweight billet 6061 aluminum |
| Shackle size | Standard 3/4 inch screw pin |
| Pin | Removable, oversized 5/8 inch double shear |
| Mounting tab thickness | 1.2 inch |
| Fairlead compatibility | Hawse and Roller |
| Made in | USA |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit mount. It attaches to winch cable and synthetic rope eyes instead of a vehicle mounting point, so the fairlead type and the 3/4 inch shackle are the matches that matter.
Installation notes
Set the cable or rope eye inside the body, secure it with the 5/8 inch pin, and attach the 3/4 inch screw pin shackle at the front hole. Confirm the pin is fully seated before the line takes load.
What’s included
One ProLink Loaded shackle mount, part number 00015-01.
Not included: The 3/4 inch screw pin shackle that attaches to the front hole.
































