Overview
The Factor 55 FlatLink 00050-06 gives recovery winches a folding shackle thimble and D-ring in place of the usual hook. The folding shackle mount is its defining feature. It is a universal fit, so it is not built around one vehicle, and the right choice depends on your winch hardware.
Hooks have a way of cutting and fraying strap material, and strap ends may escape during the slack of a typical winching recovery. A screw pin shackle holds the strap loop securely through its screw pin. The 00050-06 is an alternative to the hook that avoids splicing, with its cable eye retained by a steel pin and snap ring.
Key features
- Shackle thimble and D-ring that replace a conventional winch hook
- Folding shackle mount that Factor 55 presents as a first for recovery winches
- Profile under 1.75 inches, compatible with roller fairlead license plate mounting brackets
- Splice-free fit for steel cable or synthetic rope up to 3/8 inch diameter
- A 5/8 inch diameter grade 5 steel double shear pin with internal snap ring holds the cable eye
- EPDM rubber guards on 4 barbed tips protect alloy fairleads
- Stows against roller or Hawse type fairleads and uses common 3/4 inch shackles
- Made in the USA; billet 6000 series aluminum, anodized and powder coated in 5 colors
Before a winch recovery
A winch line that runs through a hook can wear the strap or cable at the bend, and a hook can slip when the load shifts. A thimble and D-ring setup holds the line at a fixed loop, which many recovery users prefer for steady pulls. Before any recovery, confirm the anchor point is rated for the pull you expect and that the rigging moves freely under tension.
Inspect the pin and snap ring each time you use the thimble. Look for bent metal, a pin that does not seat fully, or a snap ring that has lost its hold. Rubber guards should stay intact so the fairlead edge remains protected. Replace worn guards before the alloy is exposed, and keep the pin clean so it does not bind when you remove it after a pull.
- Check that the pin seats fully before each pull
- Keep the snap ring seated and undamaged
- Replace guards that are torn or missing
- Keep the cable path straight through the fairlead
Specifications
| Brand | Factor 55 |
|---|---|
| Part number | 00050-06 |
| UPC | 70000693226 |
| Material | 6000 series billet aluminum |
| Finish | Anodized and powder coated, 5 colors |
| Thickness | Less than 1.75 inches |
| Rope or cable size | Up to 3/8 inch diameter, steel cable or synthetic rope |
| Cable eye pin | 5/8 inch diameter grade 5 steel double shear pin with internal snap ring |
| Guards | EPDM rubber, 4 barbed tips |
| Shackle size | Common 3/4 inch shackles |
| Origin | Made in the USA |
Vehicle fitment
Universal fit, with no model year or chassis code attached. Fitment depends on the winch rather than the vehicle: check your fairlead, mounting bracket and rope or cable diameter.
Roller and Hawse type fairleads are the two styles it is designed to stow against. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Factor 55 indicates the FlatLink installs in minutes and needs no rope splice. Look over the rubber guards and the pin before a recovery, since the guards protect alloy fairleads.
What’s included
The shackle thimble and D-ring assembly is described with EPDM guards, the 5/8 inch steel pin and the snap ring.
Not included: 3/4 inch shackles, rope or cable, and fairlead hardware.


















