Overview
The Factor 55 FlatLink 00050-02 is a winch safety thimble and D-ring that replaces the conventional winch hook on a recovery winch. It is a folding shackle mount for recovery winches. It is a universal fit product, so the fairlead style and the rope or cable diameter decide whether it suits a given winch.
Conventional hooks can cut and fray recovery straps, and during the slack moments of a typical winching recovery, strap ends can work free of the hook. A screw pin shackle keeps strap loops from escaping because of its secure screw pin. The FlatLink is meant as a hook replacement that avoids splicing the rope.
Key features
- Shackle thimble and D-ring replace the conventional winch hook
- Folding shackle mount for recovery winches
- Less than 1.75 inches thick, so it works with roller fairlead license plate mounting brackets
- No splicing; accepts steel cable or synthetic rope up to 3/8 inch diameter
- Cable eye retained by a 5/8 inch diameter grade 5 steel double shear pin and internal snap ring
- EPDM rubber guards protect alloy fairleads and attach with 4 barbed tips
- Stows against roller or Hawse type fairleads and is designed for common 3/4 inch shackles
- Built from 6000 series billet aluminum, made in the USA, and finished in 5 different colors
Thimbles and hook replacement
A thimble protects the rope eye where it bears on a connection point, so the line is not bent sharply or abraded at the joint. Swapping a hook for a thimble and D-ring changes how the load sits, and the D-ring should be sized so the shackle sits flat rather than cocked. Synthetic rope is sensitive to sharp edges, so smooth contact surfaces help it last. Pay attention to the rope’s rated strength and any reduction from knots or wear.
Before each recovery, inspect the thimble, pin and snap ring along with the rope. Look for flattened or grooved surfaces, a loose pin, and fraying where the rope meets the eye. Keep the rope off the ground where it can pick up grit, and store it dry so it does not degrade. A line that shows damage should be retired rather than repaired with a knot.
Specifications
| Brand | Factor 55 |
|---|---|
| Part number | 00050-02 |
| UPC | 70000692755 |
| Material | 6000 series billet aluminum |
| Finish | Anodized and powder coated, 5 different colors |
| Thickness | Less than 1.75 inches |
| Rope or cable size | Steel cable or synthetic rope up to 3/8 inch diameter |
| Cable eye pin | 5/8 inch diameter grade 5 steel double shear pin with internal snap ring |
| Guards | EPDM rubber, attached with 4 barbed tips |
| Shackle size | Common 3/4 inch shackles |
| Origin | Made in the USA |
Vehicle fitment
It is a universal fit product, so no vehicle year, make or model applies. Suitability depends on the winch setup: it mounts with roller fairlead license plate brackets and stows against roller or Hawse type fairleads.
Check your fairlead type, mounting bracket and rope or cable diameter. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Factor 55 describes installation as taking minutes, and no splicing is needed on the rope. Inspect the double shear pin and internal snap ring before each recovery, because they hold the cable eye in place.
What’s included
The FlatLink is described with its EPDM rubber guards, 5/8 inch steel double shear pin and internal snap ring.
Not included: 3/4 inch shackles, winch cable or synthetic rope, and the roller or Hawse type fairlead.


















