Overview
The Skyjacker 6 Inch Coil Over Conversion Suspension Lift Kit with M95 Monotube Shocks, part number F1761LSK-M, is a 6 inch lift kit for the Ford F-250 Super Duty. It fits 2017–2020 F-250 Super Duty models in the King Ranch, Lariat, Limited, Platinum, XL and XLT trims.
The kit has Fox performance shocks at the front and M95 Monotube shocks at the rear, with the rear lifted by a block and spacer. Shocks are included, and the lift height range is 6 to 7 inches.
A coil over conversion changes the front spring and shock arrangement to a coil over design, so the front height and ride depend on that setup. The rear block and spacer raises the back of the truck, so check the front and rear heights together after fitting.
Key features
- Coil over conversion design
- Fox performance shocks at the front
- M95 Monotube shocks at the rear
- Rear block and spacer lift
- Shocks included
Front and rear height balance
A coil over conversion changes the front spring and shock arrangement, so front height and ride are set by the new coil over setup. Compared with the rear, the front carries steering and braking forces, so its geometry needs careful attention after fitting. The rear block and spacer raises the back of the truck separately, which can leave the front and rear heights out of step if they are not measured together.
Trucks used for towing or hauling put heavy loads on the rear, so the shock and bump stop clearances deserve a check once the kit is in place. Heavier tires on a lifted Super Duty can also change steering feel and wear, and regular inspection of the coil over mounts and fasteners helps catch problems early.
- Measure front and rear height together
- Check the shock length at full droop
- Recheck fastener torque after the first drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | F1761LSK-M |
| Suspension type | Coil over conversion lift kit |
| Lift | 6 inch |
| Lift height range | 6 to 7 inches |
| Front shocks | Fox performance |
| Rear shocks | M95 Monotube |
| Rear lift method | Block and spacer |
| Shocks included | Yes |
Vehicle fitment
It fits the 2017–2020 Ford F-250 Super Duty in the King Ranch, Lariat, Limited, Platinum, XL and XLT trims.
F-250 years outside 2017–2020, F-350 and other Ford models are not in the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This kit converts the front to coil overs and uses a rear block and spacer. Check the shock length and the block height against the 6 inch lift before fitting.









