Overview
The Skyjacker 3 Inch Performance Strut Lift Kit with Rear Nitro 8000 Shocks, part number TC536STBN, is a 3 inch lift kit for the Toyota Tacoma. It fits 2016–2019 Tacoma models in the Limited, SR, SR5, TRD Off-Road, TRD Pro and TRD Sport trims.
The front has performance shocks and the rear has Nitro 8000 shocks, with the rear lifted by a block and spacer. Shocks are included in the kit, and the lift height range is 0 to 3.5 inches.
The Nitro 8000 is the rear shock in this kit, and the front uses performance shocks, so the kit is a complete front and rear setup rather than a front-only change. The rear block and spacer lifts the back of the truck, so check the front and rear heights together after installation.
Key features
- 3 inch performance strut lift
- Nitro 8000 rear shocks
- Performance front shocks
- Rear block and spacer lift
- Shocks included
Rear block and spacer basics
A rear block lift raises the axle relative to the frame, which changes the pinion angle of the differential. The driveshaft and transmission angle also shift, and a large change can cause vibration at highway speed. Brake lines and the rear shock mounts may need to accommodate the new position, so check clearance before the truck is driven on the road.
Front struts and rear blocks are often replaced together to keep the truck level. Once the new height is set, look over the driveline, the rear brake hoses and the shock mounting points for stretch or contact. A short test drive on a familiar road will show whether the vibration or noise has settled.
- Check driveshaft angle and vibration after fitting
- Inspect brake hoses for stretch at the new height
- Keep front and rear height in balance
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | TC536STBN |
| Suspension type | Lift kit (performance strut) |
| Lift | 3 inch |
| Lift height range | 0 to 3.5 inches |
| Rear lift method | Block and spacer |
| Front shocks | Performance shocks |
| Rear shocks | Nitro 8000 |
| Shocks included | Yes |
Vehicle fitment
The kit fits the 2016–2019 Toyota Tacoma in the Limited, SR, SR5, TRD Off-Road, TRD Pro and TRD Sport trims.
Tacoma years outside 2016–2019 and other Toyota models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rear uses a block and spacer, so check the block against your rear axle position before fitting. The front performance struts are part of the same kit.









