Overview
The Skyjacker G452RKBLT is a 4.5 in. dual rate long travel suspension lift for the 2020–2026 Jeep Gladiator Rubicon. The system uses 3 in. rear coil springs and Black MAX shocks at the front and rear, with a lift height range of 4 to 5.5 inches.
The dual rate springs give two stages of spring rate. The first stage delivers a comfortable highway ride and lengthens during articulation to keep the tires on the ground. The second, softer stage takes over only after the spring is compressed past the first stage, which keeps the vehicle controlled through body roll and heavy off-road movement.
Key features
- 4.5 in. long travel lift system
- Dual rate coil springs
- 3 in. rear coil springs
- Left and right coil springs designed like original equipment
- Black MAX front and rear shocks, length-fitted for full articulation
- Variable second stage on the Gladiator rear coils for loads when overlanding and towing
Lift Height and Driveline Geometry
A lift of several inches shifts the axles, driveshafts and steering geometry, so the change needs planning beyond the shocks and springs. Measure the ride height at all four corners before starting, and record the numbers so the result can be compared after the job. Driveline angles and caster both move with the lift and are worth measuring once the system is in place.
Long travel shocks have to reach full extension when the axle drops, so check the shock mounts and the brake lines at full droop. Sway bar links and the steering linkage may need a check too, since the new ride height changes their angles. Plan for an alignment after installation and for a recheck after the first few drives.
- Record ride height at all four corners before and after
- Check brake lines and sway bar links at full droop
- Measure driveline angles and caster after installation
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYG452RKBLT |
| Kit type | Suspension lift kit, 4 to 4.5 in. |
| Lift height range | 4 to 5.5 inch |
| Rear coil spring | 3 in. |
| Front shocks | Black MAX |
| Rear shocks | Black MAX |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2020–2026 Jeep Gladiator Rubicon.
The list covers only the Rubicon, so Gladiator Overland, Sport and Sport S models are not included, and neither is the Wrangler JL. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A lift of this size changes ride height, driveline angles and suspension geometry. Have the alignment checked and the driveline angles measured after the system is installed.
The long travel Black MAX shocks are length-fitted by Skyjacker to allow the maximum extension for full articulation, so they are matched to this system rather than to a standard lift. Use the shocks supplied with the kit when setting up the new ride height.
What’s included
The system includes Black MAX front and rear shocks and 3 in. rear coil springs. Confirm the front components against your installation before starting.







