Overview
The Skyjacker D4512K is a Class I suspension lift kit with a 4-4.5 in. lift. It includes front coil springs, a pitman arm, bump stops, rear Add-A-Leaf springs, rear U bolts, a vent hose and a steering stabilizer. It carries a direct fit label, so verify your year, make, model and chassis first.
The kit is powder coated black and has a Limited Lifetime Warranty. Other components are needed to complete the installation, so plan to source them separately.
Key features
- 4-4.5 in. lift
- Front coil springs
- Pitman arm and steering stabilizer
- Bump stops and vent hose
- Rear Add-A-Leaf springs and rear U bolts
- Powder coated black finish
Steering and axle checks
A pitman arm and steering stabilizer affect steering geometry and the way the front wheels respond. When a kit includes these parts, alignment and steering play should be checked once they are in place. Worn stabilizers and loose drag links can cause a wandering steering wheel or a shimmy at speed, especially after a lift changes ride height.
Rear Add-A-Leaf springs and rear U-bolts change the axle position, so check brake lines and the vent hose for stretch or kinks. Bump stops limit suspension travel and should be checked for contact after installation. Replace worn steering and suspension parts together so the front and rear stay balanced, and inspect them at routine service.
- Inspect steering stabilizer mounts for play
- Check drag links and tie rods for wear
- Confirm bump stops clear the axle at full compression
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | D4512K |
| UPC | 803696124896 |
| Kit type | Class I suspension lift kit |
| Lift height | 4-4.5 in. |
| Included parts | Front coil springs, pitman arm, bump stops, rear Add-A-Leaf springs, rear U bolts, vent hose, steering stabilizer |
| Finish | Powder coated black |
| Warranty | Limited Lifetime Warranty |
Vehicle fitment
Vehicle coverage is unconfirmed, so compare your year, make, model and chassis with the kit before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit includes a pitman arm and steering stabilizer, steering alignment should be checked once the parts are in place.
What’s included
Front coil springs, pitman arm, bump stops, rear Add-A-Leaf springs, rear U bolts, vent hose and steering stabilizer.
Not included: Additional components are needed for a finished installation. Review what your build still requires before starting.







