Overview
The Daystar KJ09188KV is a 2-inch lift kit for the 2020–2026 Jeep Gladiator JT and the 2018–2026 Jeep Wrangler JL. It raises the vehicle about 2 inches and clears 37-inch tires on non-Rubicon models. Rubicon versions of both vehicles are covered by the kit.
The kit includes Kevlar-infused polyurethane spacers, front lower control arms, sway bar end links, extended bump stops and front shock extensions. The lift size is 1.5 to 2 inches, with a lift height range of 0 to 3.5 inches. The kit carries a lifetime Go Everywhere Warranty.
Key features
- Raises the Gladiator and Wrangler JL about 2 inches
- Clears 37-inch tires on non-Rubicon models
- Kevlar-infused polyurethane spacers
- Front lower control arms included
- Extended bump stops and front shock extensions
- Sway bar end links included
- Lifetime Go Everywhere Warranty
Lift height and suspension geometry
A 2-inch suspension lift changes geometry at the front end, so it affects steering, camber and driveline angles more than a simple spacer. Replacing the front lower control arms and adding a lift makes a wheel alignment and a driveline angle check essential after installation. Sway bar end links and bump stops also change their working range, so inspect them for wear.
Consider how you plan to use the vehicle. Larger tires add rotational weight and can stress axles, so the setup should match your driving on roads and trails. Shocks are not part of this kit, so an older shock may not match the new height, and a check of shock condition is worthwhile. Related parts often replaced together include ball joints and tie rod ends when they show wear. Recheck the hardware after the first few drives and inspect the spacers for cracking at regular service.
Specifications
| Brand | Daystar |
|---|---|
| Part number | DAYKJ09188KV |
| Lift size | 2 inches, within a 1.5 to 2 inch suspension lift range |
| Lift height range | 0 to 3.5 inches |
| Rear lift component | Spacer |
| Front shocks | None included |
| Rear shocks | None included |
| Tire clearance | 37-inch tires on non-Rubicon models |
| Warranty | Lifetime Go Everywhere Warranty |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2020–2026 Jeep Gladiator JT models and 2018–2026 Jeep Wrangler JL models, covering both two-door and four-door Wrangler JL bodies across the Rubicon, Sport, Sport S, Moab and Sahara versions.
Wrangler JK models from 2007 through 2018 are not on this list. The 37-inch tire clearance applies to non-Rubicon models, so Rubicon owners should confirm tire fit before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing the front lower control arms and adding a 2-inch lift changes suspension geometry, so a wheel alignment and a driveline angle check belong on the list after installation.
What’s included
The kit includes Kevlar-infused polyurethane spacers, front lower control arms, sway bar end links, extended bump stops and front shock extensions.
Not included: Shocks are not included with this kit.










