Overview
The Skyjacker JK200BPNSR is a 2 inch Softride coil spring lift kit with Nitro 8000 shock absorbers for 2-door 2007-2018 Jeep Wrangler JK models. It uses the same coil springs and brackets as the Hydro 7000 version, paired with Nitro 8000 shocks. It fits the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims.
The spec sheet gives a lift height range of 3 to 4.99 inches, which is higher than the 2 inch name, so confirm the final height before choosing it.
Skyjacker says its kits for 2007-2015 Wrangler JK models were tested by an independent agency and certified compliant with FMVSS 126, and that they keep Electronic Stability Control performance. The Nitro 8000 shock in this kit is the Nitro Gas option, alongside the Hydro and M95 Series Monotube choices in the line.
Key features
- Softride coil springs front and rear
- Nitro 8000 shock absorbers included
- Rear track bar bracket and bumpstop relocation
- Hot wound 5160 spring material, shot peened
- Preset solid to allow full coil bind
- Maximum tire size 33 x 12.50
Nitro shocks and coil spring care
Gas-charged shocks like the Nitro 8000 keep damping steady under heat and repeated trail use, which suits a lifted Wrangler that sees rough terrain. Their mounts and bushings carry the extra travel from the new height, so a quick look after the first outings catches loose hardware early.
Softride coil springs seat against the track bar bracket and bumpstop relocation parts, so those pieces need checking as a set. Look for wear on the spring seats and any rubbing at full compression. Keeping the track bar bracket bolts torqued helps the rear axle stay where it was set during installation.
- Inspect shock mounts after the first trail runs
- Check coil springs for seat wear
- Keep track bar bracket bolts torqued
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | JK200BPNSR |
| UPC | 803696222370 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Coil spring kit |
| Rear lift method | Coil springs |
| Shocks | Nitro 8000 |
| Spring material | Hot wound 5160 |
| Maximum tire size | 33 x 12.50 |
Vehicle fitment
It fits the 2007-2018 Jeep Wrangler JK 2-door in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims.
Four-door Wrangler Unlimited models are not covered by this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Keep the rear track bar bracket and bumpstop relocation parts with the coil springs, because they set the rear axle position under the new height. Check the steering stabilizer and the front track bar after installation.
The Softride springs and track bar bracket are sold as one kit, so install the whole set together rather than mixing parts from other kits.
What’s included
The kit includes front and rear Softride coil springs, a rear track bar bracket, bumpstop relocation parts and Nitro 8000 shock absorbers.






