Overview
The Rubicon Express RE7128M is a 4.5-inch Super-Flex suspension lift kit with Mono Tube shocks included. It fits the 2007-2018 Jeep Wrangler (JK). It is the Mono Tube version of the RE7128 and includes adjustable lower control arms, an adjustable front track bar, springs, extended bump stops, brake lines and sway bar disconnects. Its lift height falls within the 3 to 4.99-inch range.
The lower control arms are upgraded with Super-Flex front control arms, and the stock upper control arms stay in place. The Super-Flex design is intended to improve trail flexibility while keeping a comfortable street ride. The fitment range is 3 to 4.99 inches. The Mono Tube shocks are included, so the shock package is complete with the kit.
Key features
- 4.5-inch lift height, within the 3 to 4.99-inch range
- Mono Tube shocks included
- Adjustable lower control arms
- Adjustable front track bar
- Replacement springs
- Extended bump stops and brake lines
- Sway bar disconnects
Setting up adjustable control arms
Adjustable lower control arms and a front track bar change the angles that set caster, camber and toe, so the alignment is part of the installation rather than an extra step. Once the new arms are in, recheck the steering geometry after the first few drives, since new bushings settle and can change how the vehicle tracks. Uneven front tire wear is usually the first sign that the setup needs attention.
The shocks, bump stops and sway bar disconnects work with the arms, so they are worth inspecting at the same time. Look for leaking shock bodies, cracked rubber and loose mounts after off-road trips. Replacing worn bushings early keeps the steering responsive and the ride predictable on pavement.
- Re-torque control arm and track bar fasteners after the first trail runs
- Check tire wear patterns at each service
- Inspect bump stops for cracks or flattening
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7128M |
| UPC | 700007255041 |
| System type | Super-Flex suspension lift |
| Lift height | 4.5 inches (chart range 3 to 4.99 inches) |
| Lower control arms | Adjustable |
| Front track bar | Adjustable |
| Shocks | Mono Tube, included |
Vehicle fitment
The kit fits the 2007-2018 Jeep Wrangler (JK) in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X versions.
This kit is built for the JK Wrangler, so match the model and trim to your vehicle before buying.
Installation notes
The adjustable lower control arms and front track bar change suspension geometry, so the alignment should be checked after the install.
What’s included
The kit includes adjustable lower control arms, an adjustable front track bar, replacement springs, extended bump stops, brake lines, sway bar disconnects and Mono Tube shocks.






