Overview
The Rubicon Express RE1685 is a front axle end bushing kit in polyurethane. It replaces the worn factory rubber bushing at the front track bar, and it contains two half bushings and one metal sleeve.
The replacement bushings are designed to improve handling and performance on a Jeep.
Key features
- Polyurethane construction in place of the factory rubber bushing
- Two half bushings and one metal sleeve in the kit
- 10mm size
- Front axle end position
Signs the bushing is worn
A track bar bushing controls side-to-side movement of the front axle. As the rubber wears, the axle can shift under braking and in corners, which makes steering feel loose and wandering. Worn bushings also let the track bar knock, so a clunk over bumps or when turning the wheel is a common early sign.
When replacing the bushings, inspect the track bar ends, the frame bracket and the hardware at the same time. Bolts that have been loosened often need new hardware, and a bent or cracked bracket should be dealt with before new bushings go in. Polyurethane is firmer than rubber, so expect a little more vibration to reach the cabin on rough roads.
Track bar work often goes hand in hand with a check of the steering stabilizer and the other suspension joints. Sideways tire wear can point to a worn track bar setup, so an alignment is a sensible step once the work is finished.
- Look for play at the track bar ends
- Check the frame bracket for cracks or bends
- Replace loose or stripped hardware
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1685 |
| UPC | 614901438895 |
| Position | Front axle end |
| Material | Polyurethane |
| Size | 10mm |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit kit for replacing the factory bushing at the front axle end. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm the bushing size and your track bar before ordering.
What’s included
Two half bushings and one metal sleeve.






