Overview
The Rubicon Express RE1860-325 is an extended rear CVO drive shaft. It is a universal fit shaft that works with Atlas transfer cases and any other 1310-series CV yoke, and it requires a slip yoke eliminator.
Length is the deciding factor for this kind of shaft. Rubicon Express measures it center to center on the U-joint, with the slip stub at the center of its travel, and tells buyers to measure the vehicle on the ground in the running position first.
Key features
- CV joint, rear position
- Extended length
- Universal fit
- Slip yoke eliminator required
- Atlas and 1310-series CV yoke compatibility
Extended shafts and length
An extended rear shaft is used when the transfer case and the rear axle are farther apart than a standard shaft can span. The added length changes the joint angles at both ends, so the shaft has to be sized for the actual driveline geometry rather than guessed. Universal fit parts give flexibility across vehicles, but the length still has to be measured against the vehicle’s own setup.
Driveline vibration is the usual sign of a length or angle problem. Look for buzzing at highway speed, a shudder when accelerating, or a clunk when moving between drive and reverse. Check that the slip yoke is not bottoming out and that the eliminator is seated correctly before assuming the shaft itself is faulty.
Extended shafts often run with more joint movement, so the CV boots and yoke seals should be checked regularly. Fresh grease in the joints and secure bolts at the yokes help keep the driveline quiet. Recheck the length after any change in lift, tire size or transfer case mounting.
- Measure the driveline with the vehicle in running position
- Inspect the CV boots after each season of off-road use
- Verify yoke sizes match before installing the shaft
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1860-325 |
| UPC | 614901439250 |
| Joint type | CV |
| Length | Extended |
| Position | Rear |
| Fitment | Universal fit |
| Slip yoke eliminator | Required |
Vehicle fitment
No single vehicle is named for this universal fit shaft. Use your own driveline measurement to choose the length.
Confirm your vehicle’s year, model and trim before ordering, and check the transfer case yoke before buying the shaft.

