Select your vehicle

Rubicon Express CVO Drive Shaft – RE1860-205

Rubicon Express

Shop Rubicon Express Drive Shafts on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rubicon Express RE1860-205 rear CVO drive shaft, extended length
  • Universal fit; requires a slip yoke eliminator
  • Works with Atlas transfer cases and 1310-series CV yokes
  • UPC 614901439113

Description

Overview

The Rubicon Express RE1860-205 is a rear CVO drive shaft in extended length. It is a universal fit shaft and works with Atlas transfer cases and other 1310-series CV yokes.

The shaft needs a slip yoke eliminator. Its length is set by the driveline rather than by a model, so take the measurement center to center on the U-joint with the slip stub at the center of its travel, with the vehicle on the ground in the running position.

Key features

  • Rear CVO drive shaft
  • Extended length
  • Universal fit
  • Requires a slip yoke eliminator
  • Compatible with Atlas transfer cases and 1310-series CV yokes

Signs the driveline needs attention

Driveline wear usually shows up as vibration first. A shaft that is slightly out of phase or worn at the joints can cause a buzz at highway speed, while a worn CV joint often clicks or pops during tight turns. Because a rear extended shaft is longer, small angle errors are magnified at the axle end.

Regular inspection is simple. Lift the vehicle safely, check the joints for play, and look at the boots for tears. Keep the transfer case output and axle pinion fasteners tight, since a loose connection can shift the shaft out of alignment over time.

  • Vibration that rises with speed
  • Clicking from a CV joint in turns
  • Torn or greasy boots
  • Loose yoke or flange fasteners

Specifications

Brand Rubicon Express
Part number RE1860-205
UPC 614901439113
Joint type CV
Length Extended
Position Rear
Fitment Universal fit
Slip yoke eliminator Required

Vehicle fitment

It is a universal fit shaft, so no single vehicle is tied to it. Match the length to your own driveline measurement before ordering.

Confirm your vehicle’s year, model and trim before ordering, and confirm the transfer case yoke matches the 1310 series.

SKU: R/ERE1860-205 Category:

Specification

Shipping weight 16.65 lbs
Package dimensions 20.50 × 4.30 × 4.30 in
brands

Questions & Answers

Does the RE1860-205 need a slip yoke eliminator?

Yes. A slip yoke eliminator is required with this rear extended shaft. Pick an eliminator kit that suits both your transfer case and axle.

What transfer case does the RE1860-205 fit?

The shaft is compatible with Atlas transfer cases and any other 1310-series CV yoke. Check the yoke on your transfer case before ordering, since the yoke size decides whether the shaft connects.

Is the RE1860-205 a universal fit shaft?

It is a universal fit shaft, which means no single vehicle is tied to it. You still need the correct length for your own driveline, measured center to center on the U-joint.

How do I know if the driveshaft needs replacing?

Replace it when joints show play, the boot is torn and the joint has lost grease, or the shaft still vibrates after balance and alignment checks. Inspect it at each service interval and after hard off-road use.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Rubicon Express Drive Shafts on Amazon