Overview
The Rock Krawler RK01941 is a heavy-duty rear sway bar link for the 2004–2006 Jeep Wrangler (LJ) and the 1997–2006 Jeep Wrangler (TJ). The links are adjustable and extended, and Rock Krawler says they suit 3 to 5 inches of lift.
The links offer adjustability and a rattle-free ride. They are made of solid alloy steel with a corrosion resistant zinc coating, have non-greasable joints, and are made in the U.S.A.
Key features
- Adjustable extended design
- Solid alloy steel construction
- Corrosion resistant zinc coating
- Non-greasable joints
- Made in the U.S.A.
- Sold as a pair
Setting link length
Rear sway bar links connect the axle to the sway bar and control how the body leans and how the axle moves side to side. On a lifted Wrangler the angle of these links changes, so the length you set has a direct effect on ride and clearance. Set the length with the truck at its installed ride height, then check that the links, brake lines and axle housing clear each other through full suspension travel.
Adjustable links are often replaced during a suspension upgrade, because the bushings and mounts carry the same loads as the new parts. At each service, look for play in the joints, cracked boots, bent bodies and damaged threads. Tighten all fasteners after the first few drives, since new hardware settles as it is used.
- Measure your lift height before setting link length
- Recheck jam nuts after the first trail runs
- Replace links in pairs for even handling
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | RK01941 |
| UPC | 700007719251 |
| Position | Rear |
| Material | Solid alloy steel |
| Finish | Corrosion resistant zinc coating |
| Lift range | 3 to 5 inches |
| Joints | Non-greasable |
| Quantity | Pair |
| Origin | Made in the U.S.A. |
Vehicle fitment
Rock Krawler lists these links for the 2004–2006 Jeep Wrangler (LJ), Unlimited and Unlimited Rubicon, and the 1997–2006 Jeep Wrangler (TJ), in 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
The JK Wrangler and other Jeep models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the link length to suit your lift height within the 3 to 5 inch range, and check clearance at full suspension travel. Lift the vehicle and support it securely before adjusting the rear links.
What’s included
A pair of links is included. Bushings, hardware and other parts are not part of the package, so check the package contents against your installation before starting.
