Overview
The Rock Krawler Front 3.5 Inch Coil Over, part number RK03639, is a front coilover shock from the Emulsion Series for 2-door 2007-2017 Jeep Wrangler (JK) models. It has a 3.5 inch lift height and is sold individually.
The shock has a 2-5/8 inch fluted aluminum body with a military grade hard anodized surface. The fluting reduces weight while keeping strength, and the anodized coating helps protect against corrosion. Internally it uses a DU bearing, a Nitrotec steel shaft, a billet aluminum valve circuit with digressive valving and redundant sealing technology.
The part is made in the U.S.A. and is an emulsion type hydraulic shock rather than a gas-charged design as Rock Krawler labels it.
Key features
- Front coilover shock, 3.5 inch lift height
- 2-5/8 inch fluted aluminum shock body
- Military grade hard anodized surface
- DU bearing and Nitrotec steel shaft
- Billet aluminum valve circuit with digressive valving
- Redundant sealing technology keeps the shock oil in
- Emulsion Series, direct fit for 2-door models
- Made in the U.S.A.
Choosing damping for trail use
Damping controls how quickly a shock slows spring movement, and it affects both comfort on the road and control on rough ground. A firm setting keeps the body steadier at speed, while a softer setting absorbs small bumps better. Match the valving to how the vehicle is used, and avoid changing it after a single trip.
Front coilovers work with the steering and brake systems, so any change at this corner should be followed by an alignment check. Inspect the tie rod ends, control arm bushings and track bar for wear at the same time, since loose parts change how the shock loads and can cause uneven tire wear.
- Check tire wear after the first alignment
- Inspect tie rod ends and bushings during setup
- Keep spare fasteners and torque values on hand
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | RK03639 |
| UPC | 700007685321 |
| Product type | Front coilover shock |
| Shock series | Coilover (Emulsion Series) |
| Lift height | 3.5 inch |
| Shock body | 2-5/8 inch fluted aluminum |
| Surface | Military grade hard anodized |
| Shaft | Nitrotec steel |
| Hydraulic / gas charged | Emulsion |
| Body styles | 2-door models |
| Quantity | Individual shock |
| Fit type | Direct fit |
| Origin | Made in the U.S.A. |
Vehicle fitment
It is a direct fit for 2-door 2007-2017 Jeep Wrangler (JK) models in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims.
It fits 2-door 2007-2017 Wrangler JK models. Verify your vehicle’s year, model and trim before you buy, particularly for 4-door Unlimited or other generations.
Installation notes
Coil-overs carry the whole corner of the vehicle, so let an experienced installer set them up and keep the vehicle on rated stands while the wheels are off.
- Torque the mounting hardware to the specification supplied with the shock and recheck it after the first drive.
- An alignment is wise after any change at the front axle.
- Cycle the suspension to confirm brake hoses and the steering have slack at full droop and compression.








