Overview
The Rock Krawler JKC0002-4 is a front 3.5-inch coilover upgrade system for 2007–2016 Jeep Wrangler JK Unlimited four-door models. It includes two 2-5/8 inch RRD coilover shocks with true dual rate spring setups, plus upper and lower shock mounts made from laser cut steel.
The system is designed to improve ride quality and stability, with load height adjustable, tunable and rebuildable shocks. The lift height range is 3 to 4.99 inches. Installation requires cutting out the factory mounts and welding in new ones.
Key features
- Two 2.625 coilover shock assemblies
- True dual rate spring setups
- Load height adjustable shocks
- Tunable and rebuildable design
- Upper and lower shock mounts of 1/4 inch laser cut steel
- Lift height range of 3 to 4.99 inches
- Made in the U.S.A.
Planning a welded coilover install
Converting to coilovers changes how the front end carries load, so planning before the first cut saves time. Fabrication is the most demanding step: the mounts must be square and placed where the springs and shocks can move freely. A qualified fabricator should check alignment, clearance for the steering linkage, and the driveline angle after the new mounts are welded. Coilover springs add stiffness that may feel different from the factory setup, so plan a short test drive on familiar roads before heading to rougher terrain. Bump stops, brake lines and sway bar links should be inspected during the install because the new geometry can change their clearance. Keep notes on the spring setup and load height so later adjustments can be repeated.
- Have the mounts checked square before welding
- Inspect brake lines and sway bar links for clearance
- Recheck alignment after the first drive
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | JKC0002-4 |
| UPC | 700007289691 |
| Position | Front |
| Suspension type | Coilover |
| Shocks | Included, 2-5/8 inch RRD coilover shocks (2.625) |
| Spring setup | True dual rate |
| Mounts | 1/4 inch laser cut steel, upper and lower |
| Lift height range | 3 to 4.99 inches |
Vehicle fitment
It fits 2007–2016 Jeep Wrangler (JK) Unlimited trims, including Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S and Unlimited X.
It covers Unlimited four-door models only. Two-door Wrangler JK, TJ, LJ and JL models are outside this fitment. Compare your year, model and trim with this fitment before buying.
Installation notes
Welding is required. The factory front shock and spring mounts must be removed from the frame, and the factory front lower shock mounts must be removed from the axle. Detailed instructions are included, and knowledge of coilover adjustment and spanner wrenches is recommended. Welding and cutting on a frame should be done by a qualified fabricator.
What’s included
The system includes two upper coilover shock mounts, two 2.625 coilover shock assemblies with true dual rate spring setups, two lower coilover shock mounts, hardware and detailed instructions.
Not included: Welding equipment is not included with the kit. Plan for welding equipment and a qualified fabricator before starting.









