Overview
The Pro Comp 926511 is a front ES9000 Series gas charged shock absorber with a stem upper mount and loop lower mount, sold individually. It fits the 2007 to 2018 Jeep Wrangler JK in 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X versions, and the Unlimited models in the same trims.
The shock measures 26.79 inches extended and 15.56 inches collapsed, which gives 11.23 inches of travel. Pro Comp rates it for a 4 inch lift. The twin tube body uses a nylon banded piston head, double welded mounts and 10 stage velocity sensitive valving. The stem and loop layout means the mounts should be checked before fitting.
Key features
- Front position for Wrangler JK
- Stem upper mount and loop lower mount
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
Stem and loop mounts
Stem and loop mounts differ in how they move under load. A stem upper mount uses a threaded stud and nut, which must be tightened evenly to avoid pinching the rubber isolator. A loop lower mount relies on a bushing that wears as the axle travels through its arc. Keep both connections tight and check them after the first few drives.
On a Jeep Wrangler JK, front shocks work hard on uneven ground and when the wheels hop at speed. Upgrading the shock is most effective when the track bar, control arm bushings and steering components are in good shape, since loose parts let the axle move in ways a shock cannot control. Many owners replace track bar bushings at the same time.
Signs that a front shock is worn include fluid on the body, bouncing that continues after a bump, and a tire that wears on one edge. Check the stem isolator for cracks and the loop bushing for flat spots. Confirm the lift height against your current front height before choosing a replacement, so the shock is not overextended.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 926511 |
| UPC | 614901117523 |
| Shock series | ES9000 |
| Position | Front |
| Extended length | 26.79 in |
| Collapsed length | 15.56 in |
| Travel length | 11.23 in |
| Upper mount | Stem |
| Lower mount | Loop |
| Gas charged or hydraulic | Gas charged |
| Lift rating | 4 in |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 2007 to 2018 Jeep Wrangler JK in 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X versions, plus Unlimited versions of the same trims.
Wrangler TJ, LJ, JL and YJ models are not on this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 4 inch lift rating is the figure to check against your front height before ordering. Confirm the stem and loop mount points before installing.
What’s included
One front shock, sold as each. Shock boots are sold separately.





















