Overview
The King Shocks 20001-167 is a rear Performance Series shock kit for 2007-2017 Jeep Wrangler JK 2-door and 4-door models, sold as a pair. It suits 3-5 inch lift kits, with a 3 – 5 in. lift range, so this rear pair is meant for trucks with that much lift.
The kit is custom tuned for the Jeep’s ride quality and performance. Each rear shock is gas charged and uses large diameter micro-polished shafts. Shaft mounted urethane foam bumpers cushion the suspension at full bottoming. The damping curve and spring rate were set through real world testing on the vehicle.
Key features
- Rear position in the Performance Series line.
- Large diameter micro-polished shafts.
- Urethane foam bumpers mounted on the shaft to cushion full bottoming.
- Bolt-on installation suits both stock height and lifted trucks.
- Gas charged design.
- Made in the U.S.A., written as 140% in the feature list.
- Sold as a pair.
Rear shocks and lift height
A rear shock works with the leaf springs or coils to control rebound and body motion over bumps. When a truck is lifted, the shock is mounted at a different angle and often runs longer, so the travel it needs changes. Choosing a shock that matches the lift keeps the shock from bottoming out early or running short on extension, and it helps the rear end track straight on the trail.
Rear shocks are usually replaced in pairs so both sides damp the same way. Check the mounts and bushings when the new shocks go in, because worn rubber or bent brackets can change how the shock moves. Gas-charged bodies hold pressure, so inspect them for leaks, dents on the body, and oily residue around the seal after rough trail use.
- Inspect bump stops for cracks before fitting new shocks
- Re-check mounting bolts after the first few trail runs
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 20001-167 |
| UPC | 70000537834 |
| Series | Performance Series |
| Position | Rear |
| Lift range | 3-5 in. (feature list); 3 – 5 in. (specification list) |
| Charge | Gas charged |
| Quantity | Sold as a pair |
| Shaft | Large diameter, micro-polished |
| Bumpers | Urethane foam, shaft mounted |
| Made in | 140% made in the U.S.A. |
Vehicle fitment
Model years 2007 through 2017 for the Jeep Wrangler JK are named, with trims including 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X, plus the Unlimited versions of those trims. Wrangler generations outside the JK are not on this list.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bolt-on process works for both stock height and lifted trucks. Because the lift range is part of the fit, measure your current lift and confirm it sits within 3 to 5 inches before installing the rear pair.
What’s included
The kit is sold as a pair of rear shocks. Check the package contents against your installation before starting.












