Overview
The Rancho RS999275 is an RS9000XL Series shock absorber with a nitrogen gas charge, and it is a direct fit for Jeep vehicles. Its 18mm chrome piston rod runs in a 2.75-in. (70mm) body, and the 9-position myRide system changes the tuning manually or with the remote.
Confirm the position, lift rating and model years before ordering, and check your vehicle details against the shock being replaced.
Key features
- Nitrogen gas charged
- 9-position myRide tuning, manual or remote
- 18mm chrome piston rod
- Liquid metallic finish
- Polyurethane bushings
- Protective boot included
- Limited Lifetime Warranty
Before you install
Front and rear shocks do different jobs. Front units help control steering and braking movement, while rear units manage weight transfer under acceleration and the load carried in the cargo area. Before installing, confirm which axle the old shock came from and whether the replacement is intended for that position.
Work on one axle at a time and keep the removed parts in order so bolts and bushings go back where they belong. Clean the mounting surfaces and inspect the bushings, since a seized or cracked bushing can change how the shock loads. Torque fasteners to the vehicle’s specification and recheck them after the first few drives. Replacing both shocks on an axle keeps the ride even. Keep the protective boot in place during installation.
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999275 |
| UPC | 10039703092750 |
| Shock series | RS9000XL |
| Fitment type | Direct fit |
| Body diameter | 2.75 in. (70mm) |
| Piston rod | 18mm chrome |
| Charge | Gas charged (nitrogen) |
| Tuning | 9-position, manual or remote |
| Bushings | Polyurethane |
| Finish | Liquid metallic |
| Warranty | Limited Lifetime |
Vehicle fitment
Match year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One RS999275 shock absorber with its protective boot.














