Overview
The Rancho RS999240 is a rear shock absorber in the RS9000XL Series with an 18mm piston rod, nitrogen gas charging and 9-position manual or remote tuning. It is a direct fit shock for Jeep vehicles.
The lift range for this shock is 0 to 1?, and the upper figure is unclear. Measure your current suspension height and confirm it falls within the range. Verify year, model and trim against your rear position before buying.
Key features
- Rear position shock in the RS9000XL Series
- 18mm piston rod
- 9-position manual or remote tuning
- Nitrogen gas charged
- Protective boot included
Choosing a lift range
A lift range tells you how much suspension height a shock is meant to handle. Rear shocks carry a different load than front units, so the rear position on your vehicle should be measured before you pick a replacement. Nitrogen gas charging helps the damping hold steady over repeated compressions, which matters when the vehicle is loaded or driven on rough surfaces.
Adjustable tuning gives you control over firmness, but it cannot change the physical fit of the shock. Before you buy, measure the current rear shock length and compare it with the length of the replacement. Rear shocks also wear with the bushings and boot, so inspect those parts when the shock is off the vehicle. Replacing a worn shock on one side can leave the axle uneven, so consider the opposite side as well. Keep the tuning settings consistent on both rear shocks so the ride stays balanced.
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999240 |
| Shock series | RS9000XL |
| Position | Rear |
| Lift range | 0 to 1? |
| Fitment type | Direct fit |
| Piston rod | 18mm |
| Charge | Gas charged (nitrogen) |
| Tuning | 9-position, manual or remote |
| Boot | Protective boot included |
Vehicle fitment
Fit depends on your year, model and trim, so check those first. It is a direct fit shock for Jeep vehicles.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match your vehicle’s lift to the 0 to 1? range before choosing this rear shock.
What’s included
One RS999240 rear shock absorber with its protective boot.














