Select your vehicle

Rancho RS9000XL Series Shock Absorber – RS999158

Rancho

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front RS9000XL Series shock absorber, part number RS999158, for the Toyota Land Cruiser
  • Fits 1988-1989 Toyota Land Cruiser Base per the manufacturer list
  • Rated for w/0 in. lift or drop
  • 9-position manual/remote tuning with an 18mm chrome rod
  • Nitrogen gas charged, protective boot included

Description

Overview

The Rancho RS999158 is a front RS9000XL Series shock absorber for the 1988 to 1989 Toyota Land Cruiser in Base trim, as shown on the manufacturer fitment list.

This unit has a 2.75-inch (70mm) body and an 18mm chrome rod, with a nitrogen gas charge and a myRide 9-position manual/remote tuning system. The rating is zero inches of lift or drop, so it fits stock or drop-height Land Cruisers. Polyurethane bushings and a protective boot come with the shock.

Key features

  • Built for the 1988 to 1989 Land Cruiser Base
  • Rated for zero lift or drop
  • Nine damping positions, adjustable by hand or remotely
  • Nitrogen gas charged body
  • Protective boot included

Things to check

Front shocks on a Land Cruiser work with the coil springs and control arms to keep the front end steady over ruts and at highway speed. When a shock fades, the front can feel floaty, wander on grooved pavement, or dive hard under braking. Since the front carries most of the braking load, it is worth looking at the shock at the same time as the brake pads and rotors during a routine service.

Front shocks do not always wear evenly. Older trucks often have seized bushings or bent brackets that make a new shock feel wrong. Before fitting, clean the mounting surfaces and check that the upper and lower bushings sit squarely. Keep the rubber boot free of grit, and avoid long periods of parking with the shock exposed to road salt, since corrosion around the rod can shorten its life.

  • Inspect upper and lower bushings before fitting
  • Check the boot for splits or grit damage
  • Replace worn front shocks in pairs where practical

Specifications

Brand Rancho
Part number RS999158
UPC 10039703091586
Shock series RS9000XL
Position Front
Body diameter 2.75 in. (70mm)
Rod diameter 18mm chrome
Tuning 9-position manual/remote
Charge Nitrogen gas charged
Lift rating w/0 in. Lift/Drop
Finish Liquid metallic
Bushings Polyurethane (red urethane)
Boot Protective boot included
Warranty Limited Lifetime Warranty

Vehicle fitment

The manufacturer list covers only the 1988 to 1989 Toyota Land Cruiser in Base trim. Check the model year and trim on your vehicle against that entry.

Other Land Cruiser generations and Toyota trucks are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The zero lift or drop rating means a lifted Land Cruiser should be checked against it before fitting. Compare the mounting ends with the shock you are removing.

What’s included

One RS999158 front shock absorber with its protective boot.

Not included: Brackets and fasteners are not included, so check the mounting ends against your existing front shock before starting.

SKU: RANRS999158 Category:

Specification

Shipping weight 6.00 lbs
Package dimensions 24.10 × 3.30 × 3.10 in
brands

Fitment

VehicleYearsTrims
Toyota Land Cruiser1988–1989Base

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Rancho RS999158 fit a 1989 Toyota Land Cruiser?

Yes. The manufacturer list includes the 1988 to 1989 Toyota Land Cruiser in Base trim, so 1989 is included. Confirm your year, model and trim before ordering.

Is this a front or rear shock?

It is a front shock. It has a 2.75-inch body and an 18mm chrome rod, with a nitrogen gas charge and 9-position tuning.

Does the shock include mounting hardware?

No mounting hardware comes with it. Compare the mounting ends with your existing front shock before fitting, and confirm that the bushings and bolts match the old unit.

Should bump stops be checked when replacing front shocks?

Yes. Worn or missing bump stops can let the suspension travel too far, which strains the shock mounts. Inspecting them during a shock replacement is a simple way to protect the new unit.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon