Overview
The Rancho RS999145 is a front RS9000XL Series shock absorber for 1986 to 1995 Toyota 4Runner and Pickup trucks and 1993 to 1998 Toyota T100 models, as shown on the manufacturer fitment list.
Rancho built this shock around a 2.75-inch (70mm) body and an 18mm chrome rod, and added a myRide 9-position manual/remote tuning system so drivers can pick a damping setting for daily road use or rougher trail work. The body is nitrogen gas charged and finished in a liquid metallic coating. The rated lift range is zero to one inch, which suits stock or lightly lifted Toyota trucks rather than larger suspension builds.
Key features
- Nine damping positions, set by hand or with the remote tuning option
- Nitrogen gas charged body
- 18mm chrome rod diameter, described by Rancho as a large Nitro Carb rod
- 2.75-inch (70mm) body diameter
- Polyurethane bushings
- Protective boot included
Toyota trail and daily use
On a Toyota 4Runner or pickup, a front shock does much of the work of keeping the front tires planted over washboard, ruts and braking. Because the lift range here is zero to one inch, this type of shock suits trucks close to stock height. If the front end has been raised more, the shock geometry changes and a different setup usually works better.
The nine damping positions let you choose firmer control for loaded trips or softer comfort for daily commuting. Dust and grit reach the rod quickly on trail trips, so wipe the rod after dusty runs and check the boot for splits. Front shocks often wear alongside the front bushings and steering components, so inspect them together when the truck starts to wander.
- Look for oil on the body or a dented rod
- Check the front bushings for cracking
- Re-check mounting bolts after the first few drives
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999145 |
| UPC | 10039703091456 |
| Shock series | RS9000XL |
| Position | Front |
| Body diameter | 2.75 in. (70mm) |
| Rod diameter | 18mm chrome |
| Tuning | 9-position manual/remote (myRide) |
| Charge | Nitrogen gas charged |
| Lift rating | 0 to 1 in. lift |
| Finish | Liquid metallic |
| Bushings | Polyurethane. |
| Boot | Protective boot included |
| Warranty | Limited Lifetime Warranty |
Vehicle fitment
It fits 1986 to 1995 Toyota 4Runner in DLX and SR5 trim, 1986 to 1995 Toyota Pickup in Base, Base Turbo, DLX, SR5 and SR5 Turbo trim, and 1993 to 1998 Toyota T100 in Base, DLX, DX and SR5 trim. Match the trim badge on your truck to those names.
Tacoma models and 4Runners from 1996 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lift rating runs from zero to one inch, so confirm the lift against a taller suspension before choosing this shock.
What’s included
One RS999145 front shock absorber with its protective boot.
Not included: Check the mounting hardware against your installation before starting.














