Overview
The Rancho RS5284 is a rear RS5000 Series shock absorber for vehicles at stock height, with no lift. It uses a twin tube cellular gas design and ten-stage velocity sensitive valving.
The RS5000 Series, first sold in 1985, is a high-performance light truck shock used on light trucks and sport utility vehicles. It works for both stock and raised vehicles.
Key features
- Rear position shock absorber
- No lift, for stock height
- Ten-stage velocity sensitive valving
- Twin tube cellular gas design
- Rods of 5/8-inch (16 mm) and 1/2-inch (12 mm), with a chrome to nitro-carburized coating change
- 1 3/8-inch piston on most applications
- Limited lifetime warranty
Stock height and fitment checks
A stock-height rear shock is sized for the ride height the suspension was designed to run. Lifting or lowering a truck changes shock length and travel, so a shock sized for stock may not suit a lifted setup. Rod diameter and eye style also vary between applications, which is why comparing the old shock before ordering matters.
Twin tube gas designs help keep damping steady through repeated bumps. Inspect the rubber bushings and mounting hardware when replacing the shock, and replace any cracked bushings at the same time. Leaking fluid, a bouncy ride and uneven tire wear are signs the shock has worn out.
- Measure the old shock before buying a replacement
- Check the rubber bushings and mounting hardware
- Replace cracked bushings at the same time
Specifications
| Brand | Rancho |
|---|---|
| Part number | RANRS5284 |
| Series | RS5000 |
| Position | Rear |
| Lift | No lift |
| Design | Twin tube cellular gas |
| Valving | Ten-stage velocity sensitive |
| Piston rods | 5/8-inch (16 mm) and 1/2-inch (12 mm) |
| Piston | 1 3/8-inch on most applications |
| Warranty | Limited lifetime |
Vehicle fitment
Confirm the make, model and year of your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering, and compare the rod and piston sizes with the shock you are replacing.
Installation notes
The rods on this shock change from chrome to nitro-carburized coating, and the rod sizes differ between the 16 mm and 12 mm sections. Compare those sizes with the shock you remove before installing.
What’s included
The item is a single rear shock.









