Overview
The Pro Comp Nitro 62687K is a leveling lift kit with 3.5 inches of lift at the front and 3 inches at the rear. The Nitro line is a lower-cost alternative to a complete suspension system. It uses coil spring spacers, torsion keys and strut spacers at the front to raise the vehicle while keeping factory steering geometry intact.
The rear uses lift blocks with U-bolts. The Nitro approach keeps factory ride quality and handling, and the kit suits owners who want larger wheels and tires without a full suspension lift. The maximum tire size is 37 inches.
Key features
- 3.5 inches of front lift
- 3 inches of rear lift
- Coil spring spacers at the front
- Lift blocks with U-bolts at the rear
- Track bar drop bracket included
- Maximum tire size of 37 inches
Lift blocks and rear geometry
Lift blocks at the rear change the position of the axle relative to the frame, which alters driveline angles and pinion position. Small changes are usually fine, but the driveshaft should be checked for vibration after installation, since a steep angle can cause shudder and early u-joint wear. The track bar drop is there to keep the axle centered as the height changes, so it is worth installing as directed.
The U-bolts that hold lift blocks should be re-torqued after the first few drives and checked periodically, because they can settle as the leaf springs seat. Look over brake lines and the parking brake cable for stretch or contact with the lifted axle. Shocks and bump stops may need attention at a higher ride height, and a tire rotation schedule helps spread wear across the axles.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 62687K |
| UPC | 614901022650 |
| Type | Nitro leveling lift kit |
| Front lift height | 3.5 inches |
| Rear lift height | 3 inches |
| Front lift method | Coil spring spacers |
| Rear lift method | Lift blocks with U-bolts |
| Maximum tire size | 37 inches |
| Track bar drop | Bracket included |
| Fitment | Direct fit |
Vehicle fitment
The kit is a direct fit. Fit depends on your vehicle’s year, model and trim.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The kit needs a wheel alignment after installation. Pro Comp includes the track bar drop bracket, hardware and instructions. Check the driveline angles on a lifted vehicle as well, since the rear lift changes them.
What’s included
Coil spring spacers, lift blocks with U-bolts, the track bar drop bracket, all necessary hardware and instructions.









