Overview
The Pro Comp PLF09119 is a 2.5 inch poly lift coil spacer kit for the front of a vehicle, rated for tires with a maximum diameter of 35 inch. It is a front-only lift that uses polyurethane coil spacers, with a direct-fit design and a black finish.
The core of this kit is a computer-designed coil spacer molded from a proprietary polyurethane formulation. It is designed for a firm yet supple ride without losing articulation on and off road. The kit uses the stock coil springs and includes all necessary hardware.
Pro Comp recommends replacing the existing shock absorbers with performance series shocks for ride quality with the kit, and the table lists longer shocks as recommended.
Key features
- 2.5 inch maximum lift from polyurethane coil spacers
- Maximum tire diameter of 35 inch
- Stock coil springs are reused
- Front lift only
- Black finish
Shocks, springs and tire size
A poly coil spacer works with the stock coil springs, so its job is to change the spring seat height rather than replace the spring. The spring rate stays the same, which means ride feel comes mostly from the shocks and tires. Owners who want more control on rough ground often add longer performance shocks that match the raised front.
Tire diameter is the next decision. A larger tire needs more clearance at the fender and steering components, and it also changes speedometer reading and gearing. Before buying wheels, measure the room at full lock and confirm the spacer seat is clean and square.
Inspect the spacer at each tire rotation and replace it if it shows cracks or flattening. Good seating at installation prevents uneven loading on the spring.
- Confirm the spacer sits square on the spring seat
- Check tire clearance at full steering lock
- Review track bar angle after the front rises
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | PLF09119 |
| UPC | 614901127430 |
| Lift height | 2.5 inch maximum |
| Maximum tire diameter | 35 inch |
| Front lift method | Coil spring spacers |
| Rear lift | Front lift only |
| Spacer material | Polyurethane |
| Finish | Black |
| Bump stops | None listed |
| Track bar drop | Not included |
Vehicle fitment
It has a direct-fit design. Confirm fit for your vehicle’s year, make and model before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit reuses the stock coil springs, the added height depends on the spacer seating correctly. Longer shocks suit the raised front end, and the front alignment should be checked after installation.
What’s included
The poly coil spacer kit with all necessary hardware. Performance shocks and a track bar drop are not included.








