Overview
The Pro Comp 63162 is a 2.5-inch leveling lift kit for GM Colorado and Canyon trucks, listed from 2015 on. The kit raises the front of the truck to match the rear, which gives clearance for larger wheels and tires. Pro Comp lists tire clearance up to 35 inches in diameter, and the kit is compatible with both gas and diesel engines.
The front cross member mounts externally and uses internal compression tubes. The kit includes high strength extended steering knuckles, a front differential skid plate and heavy duty tie rods. A front cross member skid plate is an optional add-on. A lifetime warranty applies for as long as the owner keeps the vehicle.
Key features
- 2.5-inch front lift
- Compatible with gas and diesel engines
- External mount front cross member with internal compression tubes
- High strength extended steering knuckles
- Front differential skid plate
- Heavy duty tie rods included
- Optional front cross member skid plate
Alignment after the lift
Raising the front changes the geometry the steering and suspension were designed around, so the lift is more than a simple height change. Extended knuckles and heavy duty tie rods alter how the wheels track, which is why an alignment is part of the job. A slight pull or wander after installation usually means the settings need correcting.
Tire choice goes along with the lift. Larger tires add rotating weight and can rub at full steering lock or on compression, so check clearance with the tires you plan to run. The kit allows tires up to 35 inches in diameter, and a rub test with the steering turned both ways is a good first check.
Because the front rides higher, the driveline angles and front differential can change. Watch for vibration after the first few drives and recheck the bolts on the cross member, tie rods and knuckles. Track bar and sway bar links are often inspected alongside a lift, since they connect to the same axle.
- Get an alignment right after installation
- Check steering lock for tire rub
- Recheck bolts after the first few drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 63162 |
| UPC | 614901152425 |
| Type | Leveling lift kit |
| Front lift height | 2.5 inches |
| Front lift method | Strut spacers |
| Spacer material | Steel |
| Finish | Black |
| Bump stops | None |
| Track bar drop | Not included |
| Maximum tire diameter | 35 inches |
Vehicle fitment
It is a direct fit for GM Colorado and Canyon models from 2015 on.
Earlier Colorado and Canyon model years are outside this kit’s range. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the front ride height changes, have the front alignment checked after installation. The kit’s extended knuckles and tie rods affect steering geometry, so an alignment is required.
What’s included
Front cross member with compression tubes, extended steering knuckles, a front differential skid plate and heavy duty tie rods. Not included: the optional front cross member skid plate and a track bar drop.
















