Overview
The Motive Gear C8.25-456 is a 4.56 ratio replacement ring and pinion for the Chrysler 8.25 Inch 10 Bolt rear axle. Its ratio is the number of driveshaft turns needed for one full wheel turn, so match it to your tire size and use.
The set is made from 8620 steel, with CNC work throughout and computer controlled heat treatment. Motive Gear markets it as light duty O.E. quality for on road or off road vehicles.
Key features
- 4.56 ratio for the Chrysler 8.25 Inch 10 Bolt rear axle
- 8620 steel gear construction
- CNC work throughout production
- Computer controlled heat treatment
- Light duty O.E. quality replacement
Why setup matters on 10 Bolt
The Chrysler 8.25 Inch 10 Bolt is a common axle in older trucks and vans, and many owners change ratios to suit larger tires or a different use. Mesh and backlash must be set precisely, because even a small error can produce whine or early tooth wear. A technician with the right tools will check both before the cover is closed.
Start by inspecting the carrier bearings, pinion bearing and housing bores for wear or play. Replace worn parts in the same job so the new gears are not loaded unevenly. Check the driveshaft angles and U-joints as well, since they affect how the axle is loaded. Keep the differential fluid fresh after break-in, and watch for noise that changes with speed or load.
Specifications
| Brand | Motive Gear |
|---|---|
| Part number | C8.25-456 |
| UPC | 698231224496 |
| Gear ratio | 4.56 |
| Axle type | Chrysler 8.25 Inches |
| Bolt pattern | 10 Bolt |
| Axle location | Rear |
| Axle manufacturer | Chrysler |
| Material | 8620 steel |
| Duty | Light duty |
Vehicle fitment
No vehicle is named for this set. It is for the Chrysler 8.25 Inch 10 Bolt rear axle at a 4.56 ratio. Check the axle size and ratio against your vehicle first. Confirm your vehicle’s year, model and trim before ordering.
Dana and Ford axles are different designs and are outside this Chrysler listing.
Installation notes
Mesh and backlash setup needs a skilled technician on the Chrysler axle, followed by a break-in period for the new set.
What’s included
The gear set is the ring and pinion pair.
Not included: Bearings and shims are not included. Check what your rebuild requires before ordering.











