Overview
The King Shocks 25001-151 is a front OEM Performance coilover shock kit for the 1996 to 2004 Toyota Tacoma. It is a bolt-on upgrade that gives adjustable ride height and more front wheel travel than stock, with no cutting or welding required.
Each kit’s damping curves and spring rates were developed through real-world testing, using materials and tolerances from race shocks. The shocks are gas charged with 2.5 inch diameter bodies, and valves can be adjusted with simple hand tools. The ride suits a daily driver or prerunner, and the kits bolt into stock vehicles or use a custom length rod end on lifted aftermarket suspensions.
Key features
- Front coilover design from King’s OEM Performance line
- Adjustable ride height
- 25% increase in front wheel travel.
- Gas charged shocks
- 2.5 inch diameter shock bodies that King says increase fluid capacity and heat dissipation
- Valve adjustment with simple hand tools
- Bolt-on installation with no cutting or welding
- Custom length rod end option for lifted suspensions
Setting ride height
Adjustable ride height on a coilover lets you match the front end to the rest of the suspension, which matters when the rear is raised or the tire size changes. Set the height gradually, measure from the same reference point each time, and check that the front end sits level. Stock-length setups and custom rod ends behave differently, so confirm which one you need before cutting or choosing hardware.
Front travel and damping work together on the trail. More wheel travel lets the tire follow rough ground, while the valving controls how quickly the shock returns. Start with the adjustment near the middle of its range and make small changes, testing on a mix of pavement and dirt before settling on a setting.
- Measure ride height from the same points each time
- Keep the front end level before adjusting valves
- Test on pavement and dirt before setting final valving
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-151 |
| UPC | 700005378059 |
| Position | Front |
| Shock series | Performance Series |
| Hydraulic or gas charged | Gas charged |
| Shock body diameter | 2.5 inch |
| Front wheel travel increase | 25% |
| Lift range (per title) | 0 Inch to -3.5 Inch lift kits |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits the 1996 to 2004 Toyota Tacoma, including Base, Limited, Pre Runner, S-Runner and SR5 trims.
Later Tacoma model years are not covered, since the fit ends at 2004. Match your truck’s year, model and trim before buying.
Installation notes
Installation comes with brackets, hardware and detailed instructions. Vehicles with lifted aftermarket suspensions may need the custom length rod end instead of the stock length setup, so check ride height before choosing. Support the truck securely on stands and keep hands clear of the springs while adjusting.
What’s included
The kit includes all necessary brackets and hardware, along with detailed instructions.
Not included: Rear shocks, since this kit covers the front only.









