Overview
The King Shocks 25001-177 is a Performance Series rear shock kit for the 1997 to 2006 Jeep Wrangler TJ. It is sold as a pair and is built for trucks with 3 to 5 inch lift kits. The shocks are gas charged and use remote reservoirs mounted away from the shock body.
The kit is custom tuned for high performance and ride quality, with a damping curve and spring rate developed through real-world testing. It fits the TJ trims 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X. Because it is matched to lifted TJs, confirm your lift height falls within the 3 to 5 inch range before fitting.
Key features
- Rear shocks, sold as a pair
- Gas charged hydraulic damping
- Remote reservoirs with Aeroquip high pressure hoses
- Large diameter micro-polished shafts
- 6063 aluminum alloy reservoirs that dissipate heat
- Simple bolt-on installation
- Designed for trucks with 3 to 5 inch lift kits
Matching shocks to lift height
Shock length and travel should match the lift height a truck runs. On a lifted TJ, a correctly matched shock can keep the rear suspension working through its range, while a mismatch can limit travel or strain the mounts. Matching the kit to the lift you actually run helps the shock work without bottoming out or hanging up.
Remote reservoirs are sensitive to clearance. Mount the bodies and reservoirs so hoses do not rub on the frame, the tire or the axle when the suspension flexes. Lift each wheel before the first trail run to check full range of motion, and recheck the hose clamps after the first few outings.
- Measure your current lift height
- Check reservoir clearance at full droop
- Recheck hose clamps after trail use
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-177 |
| UPC | 700005378301 |
| Position | Rear |
| Shock series | Performance Series |
| Hydraulic / gas charged | Gas charged |
| Lift height | Built for 3 to 5 inch lift kits |
| Shaft | Large diameter, micro-polished |
| Hoses | Aeroquip high pressure, on remote reservoirs |
| Reservoir material | 6063 aluminum alloy |
| Sold as | Pair |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1997 to 2006 Jeep Wrangler (TJ) in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
Jeep Wrangler YJ, LJ, JK and JL models are not covered. TJ years outside 1997 to 2006 fall outside this fit, so check the trim and model year before purchasing.
Installation notes
Installation is a bolt-on job, but the kit is sized for trucks with 3 to 5 inch lifts, so confirm your lift height first. The remote reservoirs mount apart from the shock body, so route the Aeroquip hoses clear of moving parts. Support the vehicle on stands before working on the rear suspension.
What’s included
A pair of rear Performance Series shocks with remote reservoirs and Aeroquip high pressure hoses.














