Overview
The Hi-Lift Jack 60 Inch All Cast Jack, model HL-605, is a 60-inch all cast trail jack with a 50-inch maximum lift height. It is built from cast and steel with a red powder coat finish and is used for lifting and for clamping and winching with its adjustable top clamp/clevis.
It is universal fit and is not tied to a particular year, make or model. Check the 4-1/2 inch lifting nose and 4 1/2 inch low pickup against your vehicle’s lift points and clearance.
Key features
- Adjustable top clamp/clevis for clamping and winching
- Safety bolt designed to shear at 7,000 lbs (3175 kg)
- Lifting unit automatically drops away when the load is removed
- Steel bar can be reversed for extra long life
- 4-1/2 inch (11 cm) long lifting nose for positive contact with the load
- Low pickup of 4 1/2 inch (11 cm)
- 28 square inch base plate
Lifting long jacks safely
A long jack gives reach, but the extra length also raises the leverage on the bar and the lifting unit. Keep the lifting unit centered on the load and avoid side loads, which can bend the bar or push the lifting nose off its contact point. Check that the lifting nose seats squarely before the load comes up, and keep hands clear of the moving parts throughout the lift.
Most of the safety of a jack depends on the setup, not only the jack. Use a firm base, pick a lift point designed to carry weight, and never work under a vehicle held only by a jack. Support the vehicle on stands rated for the load before going under it, and lower the vehicle slowly so the jack can be removed cleanly.
- Keep the lifting unit centered on the load
- Support the vehicle on stands before going underneath
Specifications
| Brand | Hi-Lift Jack |
|---|---|
| Part number | HL-605 |
| UPC | 52767006054 |
| Overall length | 60 in |
| Max lift height | 50 in |
| Weight | 32 lbs |
| Construction | Cast and steel |
| Finish | Red powder coat |
| Safety bolt shear rating | 7,000 lbs (3175 kg) |
| Lifting nose length | 4-1/2 in (11 cm) |
| Low pickup | 4 1/2 in (11 cm) |
| Base plate | 28 square inch |
Vehicle fitment
It is universal fit and is not tied to a year, make or model. Check that the 50-inch max lift height and 60-inch overall length suit your vehicle before use.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Keep hands clear of the lifting unit while the load is raised, and set the base plate on firm, level ground before lifting.
What’s included
The jack comes complete with an adjustable top clamp/clevis. No other included items are listed.









