Overview
The Hi-Lift UTV-424 is a 42-inch jack made for lifting UTVs. It can be placed at many points on the vehicle rather than only at specific lift points.
The jack carries a 4,660 lb load rating and works as a multi-purpose tool. The top can be used as a winch, a clamp or a spreader, and it works in water, mud, sand and snow. The jack has a powder coat finish and zinc coated hardware.
The TH-700 clamp kit, sold separately, is used to mount the jack. The jack height is 42 inches.
Key features
- Lifts a UTV from many locations, not only specific lift points
- Winch, clamp and spreader functions
- 4,660 lb load rating
- Powder coat finish with zinc coated hardware
- Designed for water, mud, sand and snow use.
Lift height and stability
A taller jack reaches more situations, but it also raises the vehicle higher, which can make it less stable on uneven ground. Before lifting, look at the base of the jack and the surface under it. A wide, firm base and a level spot reduce the chance of the jack tipping as the load rises. Lifting only a little at a time and checking the position often is a careful way to work.
Once the vehicle is up, a secure support matters more than the jack itself. Use stands or blocks placed on solid points, and never rely on the jack alone while someone is under the vehicle. Check the mounting hardware and the clamp fit before each job, since loose connections can shift under load.
- Lift slowly and recheck the position often
- Use a firm base on level ground
- Place stands or blocks before working underneath
Specifications
| Brand | Hi-Lift Jack |
|---|---|
| Part number | UTV-424 |
| UPC | 5276704244 |
| Jack height | 42 inches |
| Load rating | 4,660 lb |
| Finish | Powder coat with zinc coated hardware |
| Top tool | Winch, clamp and spreader |
| Mounting | TH-700 clamp kit, sold separately |
Vehicle fitment
It is made for UTVs in general and is not matched to a specific make, model or year.
The jack is sized for a 42-inch lift height, so check the clearance and mounting point on your UTV before using it. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The jack is mounted with the clamp kit that Hi-Lift recommends. Keep the load within the 4,660 lb rating.
What’s included
The 42-inch UTV jack with its winch, clamp and spreader top.
Not included: the TH-700 mounting kit, which is sold separately.








