Overview
The Hi-Lift Jack HL-485 is a 48-inch all cast trail jack in red powder coat, with a 51-inch overall length, a 38.5-inch maximum lift height and a 29 lb weight. The title and feature list both describe it as an all-cast jack. It is meant for lifting, clamping and winching, and fitment is universal with no vehicle named.
Plan around the 51-inch length and 38.5-inch lift when deciding whether this size suits your vehicle and the places you drive.
Key features
- Adjustable clamp with clevis for clamping and winching.
- Safety bolt designed to shear at 7,000 lbs. (3175 kg).
- Lifting unit that drops away on its own after the load is released.
- Lifting nose 4-1/2 in (11 cm) long for positive contact.
- Steel bar that can be reversed to extend its life.
- Low pickup of 4-1/2 in (11 cm).
- Base plate measuring 28 square inch.
- Red powder coat finish.
Storing a long all-cast jack
An all cast jack is heavy for its length, so the way it is carried affects both handling and the risk of chips in the finish. Store it where it will not roll or knock against hard surfaces, and keep the bar and lifting nose out of direct contact with other tools. Check that the storage spot can hold the weight securely over bumpy or uneven ground.
Powder coat resists light wear, but rock strikes and repeated contact with tire tread can chip it. Once the surface is clean and dry, touch up small chips to slow corrosion on exposed steel. Keep spare fasteners, the safety bolt and the clevis pin together so a missing part does not stop the jack from being used when needed.
- Carry the jack where it cannot roll
- Touch up chips before rust starts
- Keep spare pins and bolts together
Specifications
| Brand | Hi-Lift Jack |
|---|---|
| Model number | HL-485 (no manufacturer part number listed) |
| UPC | 52767004852 |
| Jack size | 48 inch |
| Overall length | 51 in |
| Maximum lift height | 38.5 in |
| Weight | 29 lb |
| Construction | All cast |
| Finish | Red powder coat |
| Safety bolt shear rating | 7,000 lbs. (3175 kg) |
| Lifting nose | 4-1/2 in (11 cm) |
| Low pickup | 4-1/2 in (11 cm) |
| Base plate | 28 square inch |
Vehicle fitment
It is universal fit, so no particular vehicle is required. Measure your ground clearance and the lift you need against the 38.5-inch maximum height.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The jack comes with an adjustable top clamp and clevis.








