Overview
The Hi-Lift UTV-364 is a 36-inch jack built for UTVs. It can lift a UTV from many locations, not only the factory lift points, and the top of the jack also works as a winch, clamp and spreader tool.
The jack is rated at a 4,660 lb load limit and weighs less than 30 lb. It is a multi-purpose tool for lifting, winching, pulling, spreading and clamping, and it works in water, mud, sand and snow. The finish is black powder coat over zinc coated hardware.
A mounting clamp kit is needed and is sold separately. Confirm the kit part number before ordering, since the kit is numbered TM-700 or TH-700.
Key features
- Lifts a UTV from many locations, not only the factory lift points
- Winch, clamp and spreader tool on the top
- 4,660 lb load limit
- Designed specifically for UTVs
- Black powder coat with zinc coated hardware
- Under 30 lb
Safe lifting on a UTV
A UTV jack works best when the vehicle sits on firm, level ground and the wheels on the opposite side are blocked. Sand, mud and loose rock can shift a jack’s base, so set it on a flat plate or board and keep the lifting path straight. Work slowly and check the lift point before putting any weight on the machine.
After lifting, support the UTV on stands or solid blocks rather than relying on the jack alone. Before each trip, look over the pins, ratchet teeth and handle for bends or cracks, and clean grit out of the moving parts. A light lubricant on the lift mechanism helps it operate smoothly after washing or water crossings.
- Inspect the lift pins and clamp points before each use
- Keep hands and feet clear of the jack’s travel path
- Store the jack dry to limit rust on the zinc hardware
Specifications
| Brand | Hi-Lift Jack |
|---|---|
| Part number | UTV-364 |
| UPC | 70000516153 |
| Jack height | 36 inches |
| Load limit | 4,660 lb |
| Weight | Less than 30 lb |
| Finish | Black powder coat with zinc coated hardware |
| Top tool | Winch, clamp and spreader |
| Mounting | Clamp kit, sold separately |
Vehicle fitment
It is designed specifically for UTVs and is universal in application, so it is not tied to one model. Confirm your vehicle’s year, model and trim before ordering.
Mounting depends on the clamp kit and the UTV’s frame, so check the kit’s fit on your vehicle before relying on it. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The jack mounts to the UTV with the clamp kit, which is sold separately. It can be used at many points on the vehicle. Keep the load within the 4,660 lb rating.
What’s included
The 36-inch UTV jack with its winch, clamp and spreader top.
Not included: the mounting clamp kit, which is sold separately.









