Overview
The KC HiLites Gravity G4 Amber LED Fog Pair Pack System, part number 501, is an LED fog light system for the Toyota Tacoma. Its mounts attach directly to the OEM fog lamp locations on Toyota, Lexus or Scion vehicles, so the bumper does not need to be drilled or cut for the install.
The result is an LED upgrade that keeps a clean, factory-installed look at the front of the vehicle. The pair pack is built around amber LED lights, so the package holds a pair of amber fog lights.
Key features
- Amber LED fog lights sold as a pair pack system
- Mounts to the existing OEM fog lamp locations
- No drilling or cutting of the bumper required
- Gravity G4 product line from KC HiLites
- Clean, factory-installed appearance
Before fitting fog lights
Fog lights sit low on the front of the vehicle, so they take the brunt of road grit, water splash and stones. Before buying a set, look at where the factory fog lamp location sits relative to the bumper edge and the ground clearance, since that affects how the beam sits on the road. Keep the lenses clean and check the seals after car washes, because moisture behind a lens is an early sign of a poor seal.
Fog lights are often wired to switch with the headlights or to a separate switch, and many owners add a relay so the factory wiring does not carry the load. Pick a wiring route that stays clear of the exhaust and suspension travel. A quick check of the mounts after the first week of use can catch loose hardware before it becomes a problem.
- Aim the beam low and level for road use
- Keep a spare fuse of the correct rating
- Recheck mount hardware after rough roads
Specifications
| Brand | KC HiLites |
|---|---|
| Part number | 501 |
| UPC | 84709005016 |
| Product line | Gravity G4 |
| Light type | LED |
| Light color | Amber |
| Configuration | Pair pack system |
| Mounting | OEM fog lamp locations |
Vehicle fitment
The system is built for Toyota Tacoma models with factory fog lamp locations. It mounts in Toyota, Lexus and Scion OEM fog lamp locations, so confirm your vehicle’s year and trim before ordering.
The mounts also fit Lexus and Scion OEM fog lamp locations, though this kit is sold for the Toyota Tacoma. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the system uses the factory fog lamp locations, confirm your vehicle has them before buying. Wire fog lights through a fused relay, and check local rules for auxiliary lighting before road use.
What’s included
It is sold as a pair pack of amber LED fog lights. Check the package contents against your installation before starting.














