Overview
The Rigid Industries 40338 is a D-Series LED fog light kit for the 2011–2014 Chevrolet Silverado 2500 HD and 3500 HD. It holds two D-Series LED lights in each fog light opening in the lower front bumper, and the kit is for use with four D-Series lights in total (Dually or D2).
The lights are sold separately, and the kit includes the hardware needed for the openings.
Key features
- Holds two D-Series LED lights in each lower front bumper fog opening
- Laser-cut 304 stainless steel construction
- High quality black powder-coat finish
- Installs with basic hand tools
- No drilling or cutting required
- Includes all necessary hardware
Planning a fog light upgrade
Stainless steel brackets resist rust well, but the powder coat is the first line of defense against road salt and grit. Check the finish around fasteners and cut edges every season, and touch up any chips with a matching coating before they spread. Keep fasteners snug without overtightening, since repeated vibration on a heavy truck can loosen them over time.
Heavy-duty lights draw more current than stock lamps, so a relay and a fused feed are worth considering. Route the wires away from exhaust heat and moving parts, and use weatherproof connectors where the harness meets the lamps. Aim the lights low so the beam lights the road ahead without glare for other drivers, and recheck the aim after any bumper work.
- Inspect powder coat for chips each season
- Tighten fasteners by hand, then torque to specification
- Use a relay and fused feed for the lights
- Keep wiring clear of exhaust and moving parts
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 40338 |
| UPC | 849774002250 |
| Material | 304 stainless steel, laser-cut |
| Finish | Black powder-coat |
| Light compatibility | D-Series (Dually or D2) LED, four lights |
Vehicle fitment
The manufacturer fitment list covers the 2011–2014 Chevrolet Silverado 2500 HD and 3500 HD in LT, LTZ and WT trims.
Silverado 1500 models are not in the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation uses basic hand tools and requires no drilling or cutting. Wire the lights on a fused circuit, and check local rules for fog lights.
What’s included
All necessary hardware for the fog light openings.
Not included: D-Series (Dually or D2) LED lights.














