Overview
The Baja Designs Squadron-R Pro Fog Pocket Kit, part number 447069, is a replacement fog light kit for the metal bumper on Jeep Wrangler JL Rubicon models. Two Squadron-R Pro LED lights take the place of the factory fog lights, and the manufacturer fitment list places the kit on the 2018 Wrangler JL.
Each Pro light uses four LEDs rated at 4,900 lumens, 40W and 2.90A. The housings are hard anodized and powder coated cast aluminum, measuring 3.07″ x 2.77″ x 3.07″. The LED life expectancy is listed at 49,930 hours, and the wire adapters plug into the OEM connectors.
Key features
- Pair of Squadron-R Pro LED lights
- 4,900 lumens per light from four LEDs
- Wire adapters for the OEM connectors
- Brackets that use the stock mounting points
- Hard anodized, powder coated cast aluminum housing
- LED life expectancy of 49,930 hours
Choosing Pro or Sport lights
The choice between Pro and Sport lights usually comes down to how much light is needed and how much current the vehicle can comfortably carry. Pro-level lights add more output and draw more power, which suits drivers who run trails at night. Sport-level lights are a lighter step up from factory fog lamps and place less load on the fog circuit.
Whichever level is chosen, the brackets and wire adapters work the same way. Keep the connectors clean, check the fuse after installation, and make sure the lights sit square in the pockets. Recheck the fit after the first few weeks, since road vibration can shift hardware on any bumper.
- Pro suits long night trail use
- Sport places less load on the fog circuit
- Brackets and adapters install the same way
- Check the fuse after installation
Specifications
| Brand | Baja Designs |
|---|---|
| Part number | 447069 |
| UPC | 819314026961 |
| Light model | Squadron-R Pro |
| LEDs per light | 4 |
| Lumens | 4,900 per light |
| Wattage / amps | 40W / 2.90A |
| Dimensions | 3.07″ x 2.77″ x 3.07″ |
| Housing | Hard anodized and powder coated cast aluminum |
| Fitment | 2018 Jeep Wrangler JL, listed trims |
Vehicle fitment
The kit fits the 2018 Jeep Wrangler JL in Rubicon, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S trims. It is made for the metal Rubicon bumper, so match the bumper type to those trims before installing.
Plastic-bumper Sahara vehicles need the Sahara kit, part number 447071, instead. Other Wrangler generations are not part of this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Start by confirming the bumper is the metal Rubicon type, since the brackets are designed for that bumper. The wire adapters then plug into the OEM connectors, avoiding any splicing or soldering.
What’s included
A pair of Squadron-R Pro LED lights, two sets of Jeep JL mounting brackets, plug and play wiring connectors, and mounting hardware.
