Overview
The 25-2045 is a minor ring and pinion installation kit for Dana 44 front or rear axles. It is a Rubicon Dana 44 kit and a universal fit for Dana 44 axles.
It is designed for a vehicle whose axle bearings do not need replacing, so the bearings stay in place. The kit includes the parts needed to set up a ring and pinion: a shim kit, a replacement pinion nut, a crush sleeve, a pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound.
Key features
- Minor kit, so the axle bearings are not replaced
- Includes a shim kit, pinion nut, crush sleeve and pinion seal
- Includes ring gear bolts, silicone sealer, Loctite and gear marking compound
- For Dana 44 front or rear axles
Choosing the right setup
Minor kits are chosen when the axle bearings are still in good shape. Before ordering, check for play, roughness or heat marks on the bearings with the axle apart. If the bearings are worn, a minor kit will not address the problem, and the bearings should be handled first.
A Dana 44 gear change often involves more than the setup parts. Gears, carrier components and seals that have been disturbed are commonly renewed together, which keeps the rebuilt differential consistent. Gear oil and a clean housing are also needed once the install is done, and the new gears should be broken in gently on the first drives.
- Check bearings for play and roughness before starting
- Replace seals that were disturbed during teardown
- Use fresh gear oil after the housing is closed
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2045 |
| UPC | 631410111224 |
| Kit type | Minor kit, bearings not included |
| Axle type | Dana 44 |
| Axle location | Front or rear |
| Popular axle maker | Dana |
Vehicle fitment
It is made for Dana 44 front and rear axles. Confirm your vehicle’s year, model and trim before ordering.
Match the axle type and location before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Ring and pinion setup is measured, not bolted together. Have the gear pattern checked with the gear marking compound, and set the shims by measurement, by a professional.
What’s included
The kit includes the shim kit, pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound.
Not included: the ring and pinion gear set, which is a separate part.








