Overview
The G2 Axle and Gear 30-9041A is a wheel bearing kit for the Toyota Tacoma and the older Toyota Pickup. It covers one side and is a direct fit for the 1979–1995 Toyota Pickup and the 1995–2000 Toyota Tacoma. Confirm the axle position before ordering.
G2 describes its wheel bearing kits as a set of the primary items needed to replace wheel bearings, built with Timken tapered bearings and seals. G2’s summary line for the 30-9041A reads 95-00 Tacoma, rear wheel bearing kit, 1 side, while its attribute list gives the position as front, so the axle position should be confirmed before you order.
Key features
- Wheel bearing kit for the Toyota Pickup and Tacoma
- Covers one side
- Direct fit for 1979–1995 Pickup and 1995–2000 Tacoma
- Includes the primary items for a wheel bearing replacement
- Timken tapered bearings and seals
Bearing preload and seals
Wheel bearing preload is set when the hub is reassembled, and it affects heat, noise and bearing life. Too tight and the bearings run hot; too loose and the hub wobbles. Follow a clear service procedure for the exact truck, and tighten the spindle nut in the steps it calls for.
Grease seals wear out and let in water and grit, so replacing them with the bearings is common practice. Inspect the spindle for scoring and the hub for wear before pressing in new cups. A worn spindle can ruin a new bearing quickly.
Clean the hub and bearing surfaces thoroughly, and do not spin a bearing with dirt on it. Keep the bearings in order when they come out, since the cone and cup pairs belong together.
- Replace grease seals with the bearings
- Check the spindle for scoring before fitting
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 30-9041A |
| UPC | 631410116656 |
| Product type | Wheel bearing kit |
| Position | Front per the attribute list; rear per the summary line |
| Quantity | 1 side |
| Bearing type | Timken tapered bearings (G2 states its kits use them) |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the 30-9041A covers the 1979–1995 Toyota Pickup and the 1995–2000 Toyota Tacoma. Both model names appear because the same kit is listed across the two truck generations, and one part number covers either, one side at a time.
The 30-9041A does not cover the 2001 and later Tacoma or the Tundra. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A wheel bearing job on these trucks involves removing the hub, driving out the old bearing cups and seals, and setting the new tapered bearings with the right preload. G2 lists no extra hardware with the 30-9041A, and because the kit serves one side, both ends of an axle need a kit each. Replacing the seals along with the bearings keeps grease in and dirt out of the new parts.
What’s included
- Wheel bearings and seals for one side, per G2’s description of its wheel bearing kits
Not included: a kit for the opposite side, and any hardware not described by G2.






