Select your vehicle

G2 Toyota 8″ Minor Ring and Pinion Install Kit- E. Locker – 25-2058L

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • G2 Axle and Gear 25-2058L minor ring and pinion install kit labeled E. Locker for an 8-inch Toyota axle
  • Pinion nut, pinion seal, crush sleeve and shims included
  • Ring gear bolts and assembly compounds included
  • No model years are listed

Description

Overview

The G2 Axle and Gear 25-2058L is a minor ring and pinion install kit for an 8-inch Toyota axle. The title labels it as an E. Locker version.

Confirm the axle size and your vehicle before starting any work on the gears.

Working with a locker setup

A locker changes how torque reaches the wheels. Instead of letting each wheel spin freely, a locked axle drives both wheels together, which helps when one side has little grip. Because the locker and the gear set share the carrier, a shop should confirm the locker type and its fitment before the gears are changed.

The gear set in an 8-inch axle carries the full drive load, so tooth contact and backlash need to be right the first time. Check the pinion and carrier bearings, and inspect the locker components for wear or cracks while the carrier is out. Replacing worn components together avoids a second teardown. Use the gear marking compound to confirm the tooth pattern before sealing the housing, and set a break-in period with light loads. Recheck the pinion nut torque after the first few drives.

Specifications

Brand G2 Axle and Gear
Part number 25-2058L
UPC 631410128925
Axle size 8-inch
Label E. Locker

Vehicle fitment

This kit is sized for an 8-inch Toyota axle with an E. Locker label. Match the axle and your vehicle’s year, model and trim before ordering.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Pinion depth and backlash are set with the shims, so this gear set should go in with a shop that has Toyota 8-inch experience.

What’s included

The kit holds a pinion nut, pinion seal, crush sleeve, pinion shims, carrier shims, ring gear bolts, thread locking compound, gear marking compound and silicone sealer.

Not included: A ring gear and pinion set must be bought separately.

SKU: G/225-2058L Category:

Specification

Shipping weight 3.00 lbs
Package dimensions 12.90 × 12.80 × 3.10 in
brands

Questions & Answers

What is the G2 25-2058L?

The G2 Axle and Gear 25-2058L is a minor ring and pinion install kit for an 8-inch Toyota axle, labeled E. Locker in its title, with UPC 631410128925. It holds the nut, seals, shims and assembly compounds.

Does the 25-2058L fit my Toyota?

It is for an 8-inch Toyota axle. Confirm the axle and your vehicle's year, model and trim before installing the kit.

What does the E. Locker label mean for this kit?

It means the kit is labeled for an E. Locker setup. Lockers change how torque is split between the wheels, so confirm your axle is set up with a locker before ordering.

How often should the pinion nut be checked?

Check the pinion nut torque after the first few drives and again at the first service. Preload can settle as new bearings and the crush sleeve seat, so a recheck confirms the setup has held. Use a torque wrench and follow the service procedure for your axle.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon