Overview
The G2 Dana 44 Master Ring and Pinion Install Kit, part 35-2038, is a set of installation parts for a Dana 44 ring and pinion. The bullets name the Dana 44 for 2003 to 2012 Nissan Titan trucks.
Gear sets need professional setup, and the kit is designed to be used with proper preload and tooth-contact checks. Confirm the year and axle for your truck before ordering, because the years in the bullets are the only fitment information given.
Key features
- Outer and inner Timken pinion bearings with races
- Crush sleeve for pinion preload
- Pinion and carrier shims
- Pinion nut and pinion seal
- Carrier bearings and races
- Gear marking compound for tooth-contact checks
Before you install
A ring and pinion set is set up by preload and tooth contact, and those two checks decide how the gears wear. Work through the bearings, crush sleeve and shims in order, and keep the carrier and pinion clean before each fit. Pinion depth and backlash matter as much as the parts themselves, so measure before final assembly rather than relying on feel.
Because this kit is an install kit, the gear set you choose should match the same axle and ratio plan. Replace the seals and bearings together when the carrier is opened, since parts that have already been seated are harder to reuse cleanly. Keep the gear marking compound on hand for repeat checks after the first few drives.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 35-2038 |
| UPC | 631410128895 |
| Axle type | Dana 44 |
| Application | 2003 to 2012 Nissan Titan, per bullets |
Vehicle fitment
The bullets name the Dana 44 for 2003 to 2012 Nissan Titan trucks. Confirm the year and axle against your truck before ordering, because no further fitment detail is given.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gear setup and preload are the critical steps. Gear marking compound is included to check tooth contact before final assembly, and the thread locking compound and silicone sealer are for the bolts and cover.
What’s included
Pinion nut, pinion seal, outer and inner pinion bearings with races, crush sleeve, pinion shims, carrier shims, carrier bearings with races, ring gear bolts, thread locking compound, gear marking compound and silicone sealer.
Not included: the ring and pinion gear set itself. This is an install kit.






