Overview
The G2 Axle and Gear 25-2046 is a minor ring and pinion installation kit for the Ford 10.25 Inch rear axle. It covers the setup parts for a rear differential gear swap on the 10.25 inch Ford axle when the bearings do not need to be changed.
G2 builds the kit for the installer working on a newer vehicle, and it brings together a shim kit, replacement pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound. G2 notes these are the items a general auto parts store never seems to have.
Key features
- Ford 10.25 Inch rear axle installation kit
- Minor kit for installs that reuse the bearings
- Shim kit for pinion depth and backlash
- Replacement pinion nut, crush sleeve and pinion seal
- Ring gear bolts supplied
- Silicone sealer, Loctite and marking compound
When a minor kit makes sense
A minor kit suits a gear swap where the bearings are in good condition and stay in place. Before committing to that route, check the carrier bearings, pinion bearing and races for wear, since a worn bearing can ruin a fresh set of gears in a short time. Keeping the housing clean and removing old sealer also matters, because stray debris can change pinion depth and bearing preload once the cover goes back on.
Gear setup is a sequence of measurements rather than a single adjustment. Shims set pinion depth and backlash, and each change should be followed by a new contact check with marking compound. Expect to re-check after the first drive, as gears can settle slightly. Fresh gear oil suited to the axle is a sensible final step after the break-in miles.
- Check bearings and races before reuse
- Clean old sealer and debris from the housing
- Re-check backlash after the first few drives
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2046 |
| UPC | 631410095142 |
| Product type | Minor ring and pinion installation kit |
| Kit class | Minor kit |
| Axle manufacturer | Ford |
| Axle type | Ford 10.25 Inches |
| Axle location | Rear |
| Kit contents | Shim kit, replacement pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite, gear marking compound |
Vehicle fitment
G2 provides no vehicle list for the 25-2046 and labels it Universal Fit. The kit is made for the Ford 10.25 Inch rear axle, so it is selected by that axle and not by a stated truck or year range.
The 25-2046 does not cover other Ford rear axles or the Dana 80 kits. Confirm your vehicle’s year, model and trim, and your rear axle, before ordering.
Installation notes
A rear differential gear change calls for correct pinion depth, preload and backlash, and the shims and marking compound in the 25-2046 serve that purpose. The gears themselves are separate, and a professional install is recommended. Shims adjust how deep the pinion sits and where the ring gear rides, and the marking compound shows how the teeth make contact.
What’s included
- Shim kit
- Replacement pinion nut
- Crush sleeve
- Pinion seal
- Ring gear bolts
- Silicone sealer
- Loctite
- Gear marking compound
Not included: the ring and pinion, carrier and bearings.









